HP 7000 dl Router manual #show qos map priority 10 qos map priority

SROS Command Line Interface Reference Guide Enable Mode Command Set

priority bandwidth: 150 (kilobits/sec) burst: default

packets matched by map: 0

The following example shows a particular qos map entry (in this case map entry 10):

#show qos map priority 10 qos map priority

map entry 10

match IP packets with a precedence value of 6 priority bandwidth: 400 (kilobits/sec) burst: default packets matched by map: 125520

The following examples show qos map interface stats associated with the map defined for an interface:

#show qos map interface frame-relay 1 fr 1

qos-policy out: priority

map entry 10

match IP packets with a precedence value of 6 budget 145/10000 bytes (current/max) priority bandwidth: 400 (kilobits/sec) packets matched on interface: 27289 packets dropped: 98231

map entry 20

not configured for rate limiting

map entry 30

not configured for rate limiting

map entry 50

not configured for rate limiting

map entry 60

not configured for rate limiting

map entry 70

match NetBEUI frames being bridged by the router budget 3750/3750 bytes (current/max)

priority bandwidth: 150 (kilobits/sec)

packets matched on interface: 0

packets dropped: 0

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 181