HP 7000 dl Router manual Show lldp neighbors statistics, #show lldp neighbors statistics

SROS Command Line Interface Reference Guide Enable Mode Command Set

show lldp neighbors statistics

Use the show lldp neighbors statistics command to display statistics about LLDP neighbor table actions.

Syntax Description

No subcommands.

Default Values

There are no default values necessary for this command.

Command Modes

# Enable Command Mode

Functional Notes

This command shows information about the changes in this device’s neighbor table. The information displayed indicates the last time a neighbor was added to or removed from the table as well as the number of times neighbors were inserted into or deleted from the table.

Usage Examples

The following example shows sample output for this command:

#show lldp neighbors statistics
System Last Change Time	Inserts	Deletes	Drops	Age outs
10-15-2004 14:24:56	55	3	1	1

System Last Change Time - Shows the time at which the most recent change occurred in the neighbor table.

Inserts - Shows the number of times neighbors have been added to the table.

Deletes - Shows how many times neighbors have been deleted from the table because an interface was shut down.

Drops - Shows how many times the insertion of a new neighbor into the table failed because the table was full.

Age outs - Shows how many times neighbors have been removed from the table because no new updates were received from that neighbor before its time-to-live timer expired.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 172