HP 7000 dl Router manual Show running-config, Policy-class, Qos-map, Checksum

Common Commands

show running-config

Use the show running-configcommand to display a text print of all the non-default parameters contained in the current running configuration file. Use the verbose keyword to display a text print of the entire configuration (including parameters in their default state). Specific portions of the running-config may be displayed, based on the command entered.

Variations of this command include the following:

show running-config

show running-config access-lists

show running-config access-lists verbose show running-config checksum

show running-config interface <interface>

show running-config interface <interface> verbose show running-config interface vlan <vlan id>

show running-config interface vlan <vlan id> verbose show running-config policy-class

show running-config policy-class verbose show running-config qos-map

show running-config qos-map verbose show running-config verbose

Syntax Description

access-listsDisplays the current running configuration for all configured IP access lists. interface <interface> Displays the current running configuration for a particular interface. Type the

	show running-config interface ? command to display a list of valid interfaces.
policy-class	Displays the current running configuration for all configured policy classes.
qos-map	Displays the current running configuration for all configured QoS maps.
verbose	Displays the entire running configuration to the terminal screen (versus only the
	*Optionalnon-default values).
checksum	Displays the encrypted Message Digest 5 (md5) version of the running
	*Optionalconfiguration.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 933