HP 7000 dl Router manual Following enables automatic backup on the endpoint

SROS Command Line Interface Reference Guide Frame Relay Sub-Interface Config Command Set

backup auto-backup

Use the backup auto-backupcommand to configure the sub-interface to automatically attempt a backup upon failure.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically attempt backup upon a failure.

Command Modes

(config-fr 1.16)# Virtual Frame Relay Sub-Interface Configuration Mode required

Usage Examples

The following enables automatic backup on the endpoint:

(config)#interface frame-relay 1.16 (config-fr 1.16)#backup auto-backup

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 603