HP 7000 dl Router manual Frame-relay lmi-type type, Ansi, Cisco, Q933a

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

frame-relay lmi-type <type>

Use the frame-relaylmi-typecommand to define the Frame Relay signaling (LMI) type. Use the no form of the command to return to the default value.

Syntax Description

<type>	Sets the signaling type for the endpoint
ansi	Annex D signaling method
auto	Automatically determine signaling type by messages received on the frame circuit
cisco	Group of 4 signaling method
none	Turns off signaling on the endpoint. This is used for backup connections.
q933a	Annex A signaling method

Default Values

<type>ansi

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Usage Examples

The following example sets the signaling method for the endpoint to cisco:

(config)#interface frame-relay 1 (config-fr1)#frame-relay lmi-type cisco

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 580