Sharp CD-PC3500 Transporting The Unit, Specifications, Open Close Power, General, Tuner section

Models: CD-PC3500

1 24
Download 24 pages 63.14 Kb
Page 23
Image 23
TRANSPORTING THE UNIT

TRANSPORTING THE UNIT

OPEN/

CLOSE

POWER

ON/

STAND-BY

CD

SPECIFICATIONS

Before you move this product to a new location, proceed as follows:

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD button.

3 Press the OPEN/CLOSE button to open the disc tray.

Remove all CDs inserted in the unit.

4 Press the OPEN/CLOSE button to close the disc tray.

Make sure that "NO DISC" is displayed.

5 Press the ON/STAND-BY button to enter the stand-by mode, and then unplug the AC power cord from the AC outlet.

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

General

Power source:

AC 120 V, 60 Hz

Power consumption:

150 W

Dimensions:

Width; 10-5/8" (270 mm)

 

Height; 13" (330 mm)

Weight:

Depth; 14" (355 mm)

18.2 lbs. (8.3 kg)

Amplifier section

Output power:

Front speakers;

 

60 W minimum RMS into 6

 

ohms from 60 Hz to 20 kHz

 

with no more than 10 % total

 

harmonic distortion.

 

Center speaker;

 

RMS; 30 W (1 kHz, 10 %

 

T.H.D.)

 

Rear speakers;

RMS; 30 W (total) (1 kHz, 10 % T.H.D.)

Output terminals: Front speakers; 6 ohms Center speaker; 6 ohms Rear speakers; 12 ohms Subwoofer; 47 k ohms Headphones; 16-50 ohms (recommended; 32 ohms) CD digital output (optical)

Input terminals: Video/Auxiliary (audio signal)

×2; 500 mV/47 k ohms

Compact disc player section

Type:

3-disc multi-play compact

Signal readout:

disc player

Non-contact, 3-beam semi-

D/A converter:

conductor laser pickup

1-bit D/A converter

Frequency

 

 

response:

20

- 20,000 Hz

Dynamic range:

90

dB (1 kHz)

Cassette deck section

Frequency response:

50-14,000 Hz (Normal tape)

Signal/noise ratio:

55

dB (TAPE 1, playback)

Wow and flutter:

50

dB (TAPE 2, recording/playback)

0.3 % (WRMS)

Front speaker section

Type:

3-way type [5-1/4" (13 cm) woofer,

 

2" (5 cm) tweeter and super tweeter]

Maximum input power: 120 W

Rated input power:

60 W

Impedance:

6 ohms

Dimensions:

Width; 9-1/2" (240 mm)

 

Height; 13" (330 mm)

Weight:

Depth; 10-1/16" (255 mm)

8.5 lbs. (3.9 kg)/each

Center speaker section

Type:

4" (10 cm) full-range speaker

Maximum input power: 60

W

Rated input power:

30

W

Impedance:

6 ohms

Dimensions:

Width; 10-1/4" (260 mm)

 

Height; 5-1/2" (140 mm)

Weight:

Depth; 6-1/8" (155 mm)

2.0 lbs. (0.9 kg)

Rear speaker section

Type:

4" (10 cm) full-range speaker

Maximum input power: 30

W

Rated input power:

15

W

Impedance:

12 ohms

Dimensions:

Width; 7-7/8" (200 mm)

 

Height; 3-11/16" (93 mm)

Weight:

Depth; 6-3/4" (170 mm)

1.1 lbs. (0.5 kg)/each

Tuner section

Frequency range:

FM; 87.5-108 MHz

 

AM; 530-1,720 kHz

22

Page 23
Image 23
Sharp CD-PC3500 Transporting The Unit, Specifications, Open Close Power, General, Amplifier section, Cassette deck section