(Continued)
(Main unit operation)
MEMORY/
SET
TIMER/
SLEEP
TUNING/ TIME
()
2
3
USING EXTERNAL UNITS
RCA |
cord |
To the line output jack |
Commercially available digital cable |
■Sleep operation
The radio, compact disc and cassette deck can all be turned off automatically.
1 Play back the desired sound source.
2
To change the sleep time:
While the sleep time is displayed, press the TUNING/TIME (X or W) button to adjust the time.
(Maximum: 3 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during the sleep operation.
●3 hours - 5 minutes →
●5 minutes - 1 minute →
3 Press the MEMORY/SET button.
4
Note:
●Once the sleep time is set, it will remain the same duration until the setting is changed.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button.
To cancel the sleep operation:
Press the
■Video/Auxiliary (Audio signal) input
To listen to or record signals from external sources through this unit:
1 Use an RCA cord to connect the desired external unit to the VIDEO/AUX 1 or 2 jacks.
(red ➞ right channel, white ➞ left channel)
●When using video equipment (video disc player or VCR), be sure to connect the audio output to this unit and the video output to a television.
2 | Press the |
3 | Press the VIDEO/AUX button. |
● | Select either "VIDEO 1" or "VIDEO 2". |
4
5 To record the sound from the external unit, perform steps 2
-4 of the "Recording from the
Note:
●To prevent hum interference, do not place this unit near a television receiver.
■CD digital output (optical)
The CD digital signal from this unit can be recorded by other DAT or MiniDisc recorders.
1
2 Use a commercially available digital cable to connect the unit to the OPTICAL IN jack of a MiniDisc recorder or a DAT.
3 Put the external unit in the recording mode.
4 Play a CD on this unit.
Note:
●Only CD signals can be output.
20