(Continued)
■Headphones
●Before plugging in or unplugging the headphones, make sure
the volume level is reduced.
● Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance.
The recommended impedance is 32 ohms.
● When headphones are connected, the speakers are discon- nected automatically. Adjust the VOLUME control for the desired volume.
Note:
●You cannot use the Dolby Pro Logic Surround feature with headphones.
RESETTING THE MICROCOMPUTER
DEMO
POWER
ON/
Reset the microcomputer under the following conditions:
●To erase all of the stored memory contents (clock and timer settings, and tuner and CD presets).
●If the display is not correct.
●If the operation is not correct.
1 Press the
2 While pressing down the 0/R button and the
●"CLEAR AL" will appear.
Caution:
●The operation explained above will erase all data stored in memory including clock and timer settings, and tuner and CD presets.
MAINTENANCE |
TAPE 1 |
TAPE 2 |
■Internal care
●Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab mois- tened with commercial head/pinch roller cleaner or isopropyl alcohol.
●After long use, the deck's heads and capstans may become magnetized, causing poor sound. Demagnetize these parts once every 30 hours of playing/recording time by using a com- mercial tape head demagnetizer. Read the demagnetizer's in- structions carefully before use.
●In order to ensure proper operation of the CD player, preven- tative maintenance (cleaning of the Laser
■External care
●Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then wipe with a dry cloth.
●Do not use chemically treated cleaning cloths or other chemi- cals.
21