Sharp CD-PC3500 operation manual Compact Disc Operation, CD playback

COMPACT DISC OPERATION

4	5	5" (12 cm)
		3" (8 cm)
1
2		7
		3,6
		5
		8
CD		8
2		CD
		5
1
Music schedule		More tracks indicator
Total number of tracks		Total playing time

■CD playback

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD button.

3 Press the OPEN/CLOSE button to open the disc tray.

4 Place the CD(s) on the disc tray, label side up.

●CDs can be placed on any open position on the disc tray.

●Be sure to place 3" (8 cm) CD(s) in the middle of the disc trays.

Caution:

Do not stack CDs in the tray.

This can damage the player and the CDs.

5 When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position.

6 Press the OPEN/CLOSE button to close the disc tray.

●The total number of tracks and the total playing time for one disc will be displayed. At this time, the disc number indicator is flashing.

●The music schedule will be displayed only for the number of tracks on the disc.

●If the CD contains more than 15 tracks, "C" will appear.

7 Press the desired disc number button ( 1 - 3).

8 Press the 0/R(0R) button.

●Playback will begin from track 1 on the disc you have selected to play.

●After the disc finishes playing, the next disc will automatically play.

●When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played.

●When the last track on the third disc has finished playing, the unit will stop automatically.

To interrupt playback:

①Press the CD 6 button on the remote control.

●"6" will appear.

②Press the 0R button to resume playback from the same point.

To stop playback:

Press the ■ (CD ■) button.

To remove the CDs:

While in the stop mode, press the OPEN/CLOSE button.

●The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc.

After use:

Press the ON/STAND-BY button to enter the stand-by mode.

13