HP 7000 dl Router manual Debug atm oam vcd loopback end-to-end segment Llid, Enable #debug atm oam

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug atm oam <vcd> loopback [end-to-end segment] <LLID>

Use the debug atm oam command to display Operation, Administration, and Maintenance (OAM) packets for a ATM virtual circuit descriptor (VCD). Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable debug messages.

Variations of this command include the following:

debug atm oam <vcd>

debug atm oam <vcd> loopback [end-to-end segment]

debug atm oam <vcd> loopback [end-to-end segment] <LLID>

Syntax Description

<vcd>	Shows OAM packets for a specific VCD.
loopback	Configures an OAM loopback.
end-to-end	Configures an end-to-end OAM loopback.
segment	Configures a segment loopback.
<LLID>	Specifies 16 byte OAM loopback location ID (LLID).

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Usage Examples

The following example activates ATM OAM debug messages for VCD 1:

>enable

#debug atm oam 1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 63