USER’S GUIDE

[DHCP-P] Proxy Client disabled

This message indicates that the DHCP Proxy Client has been successfully disabled. This message will appear after the DHCP Proxy Client has been disabled from Manage Mode.

[DHCP-P] Proxy Client enabled

This message will appear whenever the DHCP Proxy Client has been successfully enabled. This could be during system initialization (if configuration values have enabled it), or after the DHCP Proxy Client has been enabled from Manage Mode.

[DHCP-P] Proxy Client initialization failed

This message indicates that the DHCP Proxy Client did not initialize successfully. The DHCP Proxy Client will not be operational. Contact your Distributor or Customer Support.

[DHCP-P] UDP port (67) closed

The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPS UDP port (port 67). If the DHCP Relay Agent is enabled, the BOOTPS port must remain open. If this is the case, the DHCP Proxy Client will not close the UDP port.

[DHCP-P] UDP port (67) opened

The DHCP Proxy Client is being enabled and it must open the BOOTPS UDP port (port 67). This may occur during system initialization, or after the DHCP Proxy Client has been enabled from Manage Mode. If the DHCP Relay Agent is also enabled, it may not be necessary for the Proxy Client to open this UDP port.

[DHCP-P] UDP port (68) closed

The DHCP Proxy Client is being disabled from Manage Mode and it must close the BOOTPC UDP port (port 68).

[DHCP-P] UDP port (68) opened

The DHCP Proxy Client is being enabled and it must open the BOOTPC UDP port (port 68). This may occur during system initialization, or after the DHCP Proxy Client has been enabled from Manage Mode.

[DHCP-R] Failed to allocate memory for transmit buffer pool

The system was unable to allocate memory for the DHCP Relay Agent’s transmit buffer pool during initialization. The Relay Agent will not become operational. Contact your Distributor or Customer Support.

[DHCP-R] Failed to close UDP port (67), erc = <x>

An error occurred while the device was trying to disable the DHCP Relay Agent from Manage Mode. Contact your Distributor or Customer Support.

[DHCP-R] Failed to open UDP port (67), erc = <x>

An error occurred while attempting to enable the DHCP Relay Agent. The Relay Agent must open the BOOTPS UDP port in order to operate successfully. If this port could not be opened, the Relay Agent will not be enabled. Contact your Distributor or Customer Support.

[DHCP-R] Relay Agent disabled

The DHCP Relay Agent has been successfully disabled. This message will appear if the user disabled the Relay Agent from Manage Mode.

442 CyberSWITCH

Page 442
Image 442
Cabletron Systems CSX1000, CSX1200 DHCP-P Proxy Client disabled, DHCP-P Proxy Client enabled, DHCP-P UDP port 67 closed