Cabletron Systems CSX1000, CSX1200 manual Displays the current IPX network interface data

USER’S GUIDE

9.If IPX RIP has been enabled for the system, enter the following:

a.RIP send control (do not respond or respond)

b.frequency (in seconds) of sending RIP updates

c.RIP receive control (do not respond or respond)

d.time (in seconds) to age RIP entries

e.RIP respond control (do not respond or respond)

10.If IPX SAP has been enabled for the system, enter the following:

a.SAP send control (do not respond or respond)

b.frequency (in seconds) of sending SAP updates

c.SAP receive control (do not respond or respond)

d.time (in seconds) to age SAP entries

e.SAP respond control (do not respond or respond)

11.After all the interface information has been entered, a summary screen will be displayed similar to the sample screen below:

Current Configuration for INTERFACE "lanport1":

Interface Type	LAN
IPX Network Number	11111111
MTU (bytes)	1497
Encapsulation	Ethernet 802.2
LAN Port	1
RIP Configuration:
Send Control	Send
Send Frequency	60 seconds
Receive Control	Receive
RIP entry Ageing Time	180 seconds
Respond Control	Respond
SAP Configuration:
Send Control	Send
Send Frequency	60 seconds
Receive Control	Receive
SAP entry Ageing Time	180 seconds
Respond Control	Respond

Are you sure you want to add the INTERFACE "lanport1" (Y or N) [Y]? Y

12.As shown above, enter “Y” to save the interface configuration.

13.Repeat this procedure to add additional interfaces.

USING MANAGE MODE COMMANDS

ipxnetif

Displays the current IPX network interface data.

ipxnetif [add/change/delete]

Allows you to add/change/delete an IPX network interface.

274 CyberSWITCH