SYSTEM STATISTICS

OVERVIEW

Statistics can either be generated by issuing the ds command to display the set of statistics known as the System Statistics, or by issuing a specific command to display statistics in a specific category.

In addition to using the ds command to display the system statistics, they are also automatically written to a statistics log every 30 minutes. The statistics are stored in the following location:

Directory: \log

File Name: stat_log.nn

(“nn” is an integer that is incremented each time a new file is written.

The first set of statistics, System Statistics, are arranged by function. These are:

connectivity statistics

call restriction statistics

call statistics

throughput monitoring statistics

The rest of the statistics are arranged in alphabetical order. These statistics pertain to specific features. The statistics you choose to display will depend on which system options you have enabled. These statistics provide valuable information.

CONNECTIVITY STATISTICS

You can access Network Connectivity statistics by issuing the ds console command.

ISDN_Re-try

Retry count for re-establishing the data link after it fails.

ID_Re-try

Retry count for exchanging identification messages with a remote CyberSWITCH.

ID_Fail

Failure count for exchanging identification messages with a remote CyberSWITCH.

WAN_Reset

Reset count for the resetting of the WAN adapters.

CALL RESTRICTION STATISTICS

The system keeps a tally of the following Call Restriction statistics. These statistics can be compared to the limits you have configured. These statistics can be displayed by issuing the cr stats or the ds command at the administration console.

call minutes (day)

The total call minutes that have been logged for the day.

Page 560
Image 560
Cabletron Systems CSX1000, CSX1200 manual System Statistics, Connectivity Statistics, Call Restriction Statistics