USER’S GUIDE

For PPP, the ability to enable/disable outbound authentication (selection 3) is available. However, it is generally not necessary to enable outbound authentications on a point-to-point line. If the device is associated with a frame relay virtual circuit, and the PVC name is different than the device name, then outbound authentication is required.

In addition, if you want to add user-level security to IP, AppleTalk and bridge devices, you may also enable User Level Authentication. This requires the user that initiates a connection between the remote device and the CyberSWITCH to be authenticated at the user level as well. Refer to Device and User Level Security for details.

Note: Do not enable User Level Authentication for terminal server devices which connect through the digital modem.

Note: The CSX1200, CSX1000, and CSX150 no longer connect to devices which use the RFC 1294 protocol to define their datalink headers. For these particular products only, disregard (i.e., do not select) the IP Host (RFC 1294) menu option on the Device Authentication Menu.

9.To enter any needed IP information for your device, select IP from the Device Table Menu. The following screen will be displayed:

 

 

 

 

 

 

 

 

Device IP Menu: (device = "DAN")

 

 

 

 

1)

IP Address

 

NONE

 

 

 

2)

IP Routing

 

ENABLED

 

 

 

3)

Make calls for IP data

ENABLED

 

 

 

4)

IP Input Filter

 

NONE

 

 

 

5)

IP Output Filter

 

NONE

 

 

 

Select function from above or <RET> for previous menu:

 

 

 

 

 

 

 

 

 

 

If your device requires an IP address, enter it now. Options are:

 

none

for Direct Host or WAN links that plan to use dynamic address allocation

 

0.0.0.0

for unnumbered WAN links

IP address # for traditional numbered WAN links Enable or disable IP routing for this device.

If you want dial-out capabilities to this device, enable Make calls for IP data.

If you want to apply a predefined forwarding filter to this device, specify the filter name here. Refer to Forwarding Filters for more information.

10.To enter any needed IPX information for your device, select IPX from the Device Table Menu. The following screen will be displayed:

 

 

 

 

 

 

 

Device IPX Menu: (device =

"DAN")

 

 

1)

IPX Routing

 

DISABLED

 

 

2)

Make calls for IPX data

DISABLED

 

 

3)

IPXWAN Protocol

 

DISABLED

 

 

4)

IPX Routing Protocol

 

NONE

 

 

5)

Spoofing Options

 

 

 

 

Select function from above

or

<RET> for previous menu:

 

 

 

 

 

 

 

 

 

 

 

 

 

160 CyberSWITCH

Page 160
Image 160
Cabletron Systems CSX1000, CSX1200 manual None, 0.0