Cabletron Systems CSX1000, CSX1200 manual USER’S Guide

USER’S GUIDE

If you are using an CyberSWITCH as your local ISDN device, you can either configure an outbound phone number for the CyberSWITCH site or use the call peer command to call the CyberSWITCH without configuring the phone number for the device explicitly.

Modify the switch type and the line type (point-to-point or point-multipoint) to match your local ISDN line.

2.Configure your TCP/IP stack on your PC or similar LAN based TCP/IP device with the following information:

IP Address:an unused IP address on your local LAN Default Gateway:the IP address of the local ISDN device

If you have not configured the phone number of the remote CyberSWITCH in the local ISDN device, you must call it manually. On a local CyberSWITCH, use the call peer <phone number> command.

3.Telnet to 2.2.2.2 on your local TCP/IP device or PC. This is the unconfigured remote CyberSWITCH.

You can now configure the remote CyberSWITCH.

512 CyberSWITCH