Cabletron Systems CSX1000, CSX1200 manual Device

USER’S GUIDE

For IP Remote LAN networks, you must explicitly configure the IP (Sub)Network number.

For IPX Remote LAN networks, you may configure the IPX external network number, or you may leave the value at NONE. The IPX Spoofing Options for IPX Remote LAN devices are not available at this time. For additional information, please refer to the Configuring IPX chapter, Remote LAN Devices.

For AppleTalk Remote LAN networks, you may configure the AppleTalk network number/ range (used on the Remote LAN for this device), or you may leave the value at NONE.

13.To enable per-device compression information, select Compression from the Device Table Menu. The following menu will then be displayed:

Device Compression Menu: (device = "DAN")

1)	Compression	ENABLED
2)	Starting PPP STAC-LZS Sequence Number	1

Select function from above or <RET> for previous menu:

a.If compression is not already enabled for this device, press 1 and follow the onscreen instructions to change the configuration to enabled.

b.If the remote device does not use 1 as the starting PPP STAC-LZS sequence number, press 2 to enter a new value for the starting sequence number.

USING MANAGE MODE COMMANDS

device

Displays the current Device Table. Included in this display is each device’s ID and name. After the list has been displayed, you may enter a specific device Id to display detailed information for that device.

device add

Allows you to add a device entry to the Device Table. You will be prompted for the device name and device type. The rest of the information you will be prompted for will depend upon the device type you are configuring, and the security options that are enabled. Note that the device name is case sensitive. You are prompted for the device information similarly to the way you are prompted by CFGEDIT. Refer to the above section, Using CFGEDIT for instructions.

device change

Allows you to change information for a specific device entry. The current device table will be displayed. Enter the device Id or device name of the entry you wish to change. Note that the device name is case sensitive. Step through the configuration information displayed for the device, pressing <return> if you wish to keep the originally configured information, and entering new information where you want it changed. For a definition of the configuration elements, refer to the section, On-node Device Database Configuration Elements.

device delete

Allows you to delete a device entry for a specific device. The current device table will be displayed. Enter the device Id or device name of the device whose device entry you wish to delete. Note that the device name is case sensitive.

162 CyberSWITCH