Cabletron Systems CSX1000, CSX1200 manual Distance, Zones valid

USER’S GUIDE

atalk port stats [clear]

This command will display or clear current AppleTalk port statistics. Refer to AppleTalk Port Statistics, for a list of available atalk port statistics and their definitions.

atalk route

This command will display AppleTalk static route information. A sample output screen is shown below:

network range	distance	state	next hop	zones valid
-------------	--------	------	--------	-----------
225 - 226	0	good	0.0	TRUE

The fields in this display are defined as follows:

network range

The remote AppleTalk network range reachable through this static route. Note that if there is only a single network number instead of a range, that number will appear twice under the network range field.

distance

The number of AppleTalk routers that are traversed in order to reach the destination AppleTalk network.

state

The state of the route. Possible values are:

good - This indicates that this is a valid route.

bad - This indicates that the indicated router has not been heard from in a while; it has timed out. Therefore, it is no longer a valid route.

next hop

The AppleTalk address of the next hop device that provides access to the destination AppleTalk network. If the distance = 0, and the next hop = 0.0, this indicates that there is no router between the port and the destination. If the distance ≠ 0, and the next hop = 0.0, this indicates that the static route is over an UnNumbered port.

zones valid

For every route there is a set of associated zones. When a device has learned the complete list of zones for that route, the zones valid field will display TRUE.

atalk stats

AppleTalk statistics are comprised of six subgroups of statistics. The atalk stats command displays all six groups of the current system AppleTalk statistics. Refer to AppleTalk Routing Statistics, for a list of available AppleTalk statistics and their definitions.

Enter one of the following commands to display a subgroup of the AppleTalk statistics:

atalk stats ddp

Displays the AppleTalk Data Delivery Protocol (DDP) statistics.

atalk stats echo

Displays the AppleTalk Echo Protocol (AEP) statistics.

528 CyberSWITCH