Cabletron Systems CSX1200 Return Configuration to Factory Defaults, Accessing the Release Notes

UPGRADING SYSTEM SOFTWARE

Return Configuration to Factory Defaults

3.Change the admin and guest system passwords.

If your system was previously accessed by your distributor, the preconfigured password will be admin (in lower case). Change this password to secure your system. To make this change, enter the following command at the system prompt:

pswd

Then follow the prompts to enter a new password. Your password must be a 3 to 16 nonblank character string. Be careful, passwords are uppercase and lowercase sensitive.

RETURN CONFIGURATION TO FACTORY DEFAULTS

The default configuration files are located on the CSX1200 CD. If you wish to return to the default configuration, download the DEFLTCFG.OSW file. Follow the same steps for Local or Remote Upgrade except download the file DEFLTCFG.OSW instead of the UPGRADE.OSW file.

ACCESSING THE RELEASE NOTES

The Release Notes provide release highlights and important information related to this release that should be reviewed before you begin the system’s installation and configuration.

The Release Notes are located on CD as well as on the system’s FLASH file system.

The Release Notes on CD are located in the REL_NOTE.TXT file. This file is a DOS text file you can read on a DOS machine. Insert the CD into the drive, change to the proper directory, and enter the following command at the DOS prompt:

[CD-ROM drive]:\[platform directory][ISDN standard directory][option directory]> type REL_NOTE.TXT more

For example, if your CD-ROM is designated as drive D, you are installing a CSX1204, using US ISDN standards and the IP/IPX option, you would use the following path:

D:\CSX1204\US\IPIPX> type REL_NOTE.TXT more

Workgroup Remote Access Switch 81