Cabletron Systems CSX1200, CSX1000 manual Manage Mode updates have been successfully committed

SYSTEM MESSAGES

System Message Summary

Manage Mode updates have been successfully committed

The above message indicates that the Dynamic Management commit command was successfully completed.

Manual intervention required: please replace LAN card

Older versions of the Ethernet adapter may need to be updated or replaced to run Release 2.3 or greater. If the above message appears in your system log messages, you will need to replace your Ethernet adapter.

Manual restart initiated on DM board in slot <slot #>

There was an attempt to restart the specified Digital Modem with the modem restart command. Check subsequent log messages to verify the command was successful.

Maximum call charges exceeded for month

The configured maximum for monthly call charges has been exceeded.

Maximum call minutes per day limit (x) has been reached

The described limit has been exceeded. The next log message will indicate whether calls will still be allowed or not.

Maximum call minutes per month limit (x) has been reached

The described limit has been exceeded. The next log message will indicate whether calls will still be allowed or not.

Maximum calls per day limit (x) has been reached

The described limit has been exceeded. The next log message will indicate whether calls will still be allowed or not.

Maximum calls per month limit (x) has been reached

The described limit has been exceeded. The next log message will indicate whether calls will still be allowed or not.

MCP detected channel failure: <channel number>

A link has failed for some abnormal reason and the indicated channel has been disconnected. This message is generally preceded by another message which indicates the underlying protocol. Refer to that message. If this does not pinpoint the problem, check the application on the remote device to see if it is working correctly.

Memory Access Timeout

This indicates a TDM bus connector failure that is specific to the TDM bus connecting a primary rate and a basic rate adapter. Ensure that the TDM bus has been correctly connected to the two adapters. If problem continues, contact your Distributor or Customer Support.

MEMORY LIMITED - <x> COMPRESSION connections available

Where “x” is equal to the number of connections that can be supported. There is not enough memory available to support the number of compression connections being allocated. You may want to purchase more memory for your system. Contact your Distributor or Customer Support.

Mild congestion CLLM received for DLCI <dlci index>

A CLLM message was received indicating mild congestion may be expected on the PVC associated with the indicated DLCI.

Workgroup Remote Access Switch 463