Radius ipres | Cabletron Systems CSX1000, CSX1200 manual

USER’S GUIDE

radius ipres

Attempts an authentication session using the IP resolution. The following is an example display of the screen.

[System Name]>radius ipres

IP Address of the Host logging in (<RET> to abort)? 19.63.4.5

Send Radius Authentication Request... Please wait [AUTH] Warning code: 0001 Timeout.

radius macres

Attempts an authentication session using the MAC resolution. The following is an example display of the screen.

[System Name]>radius macres

MAC Address of the Host logging in (<RET> to abort)? 0ab34252d546

Enter password? password123

Send Radius Authentication Request... Please wait

[AUTH] Warning code: 0002 Missing required attribute from server.

Caller-Id:2340823-098

Framed-Data-Rate: 64KB

Missing attribute: Device-Name

radius pap

Attempts an authentication session using PAP. The following is an example display of the screen.

[System Name]>radius pap

Enter the device name (<RET> to abort)? doe

Enter password (<RET> to abort)? password123

Send Radius Authentication Request... Please wait

Authentication Rejected...

radius route

Attempts an authentication session using ROUTE LOOKUP. The following is an example display of the screen.

[System Name]>radius route

IP Address to determine route for (<RET> to abort)? 3.3.3.3

Send Radius Authentication Request... Please wait

Authentication Successful...

Device-Name:	left.CSX
Framed-Address:	128.111.1.3
Phone-Number:	18005551212
Framed-Data-Rate:	64KB
Framed-Protocol:	PPP/IP

Framed-Route:3.0.0.0 255.0.0.0 128.111.1.3 2 RAP(RIP-Always Propagate)

550 CyberSWITCH

Image 550

Cabletron Systems CSX1000, CSX1200 manual Radius ipres

Contents

USER’S Guide Virus Disclaimer Trademarks DOC Notice Contents Ordering Isdn Service US Only Configuration Tools Cfgedit Security Overview Configuring System Options and Information Configuring Off-node Server Information Configuring Advanced Bridging Configuring Advanced IP Routing Configuring IPX Configuring Snmp Configuring Other Advanced Options System Verification Problem Diagnosis LED Indicators System Messages System Statistics Routine Maintenance Cfgedit Map Using this Guide Documentation SET Cfgedit MAP Cfgedit Screens Guide ConventionsUser’s Guide CyberSWITCH System Overview Cyberswitch Cyberswitch Network Unique System Features Isdn Cyberswitch Radius Interoperability OverviewInteroperability Protocols Interoperability Devices Security Overview Network Interface Overview Isdn System Components Remote Isdn Devices Switches Supported Safety Considerations Hardware Overview System Platforms CSX1000 and NE Link 1000 a Network Express Product CSX1001, shown below, is equivalent to the NE Link 1000 B2 Workgroup Remote Access Switch System Characteristics EMI CSX1200 CSX1204 BRI Version Cabling Information LAN AccessAUI Pin Signal Function Transmit + Receive + No Connect WAN Access Basic Rate Interface Receive Data Pin Signal Function Carrier DetectRing Indicator Transmit Data CSX1200-E11-MOD System Modules System Modules CSX1200-U4-MOD Overview Configuration FilesSoftware Overview System Software Operational Files User Level Security Files System Installation Accessing the CyberSWITCH Workgroup Remote Access Switch Ordering NI-1 Lines Using NI-1 Isdn Ordering Codes Ordering Isdn Service US onlyOrdering NI-1 Lines Using EZ-ISDN Codes Ordering BRI Isdn Lines Using Provisioning Settings Provisioning Settings for AT&T 5ESS Switches NI-1 AT&T Custom Point-to-Point CSV limit CSV NB limit AT&T 5ESS NI-1 ServiceUnrestricted CSD limit CSD NB limit Any CSV limitCSD limit Provision Settings for Northern Telecom DMS-100 Switches Version Functional Yes Number of call AppearancesBasic Information for Ordering PRI Isdn Lines Option Local Bell Operating Company Type of SwitchDisabled Sprint Choose a suitable setup location Hardware InstallationPRE-INSTALLATION Requirements Verify administration console requirements Installing the CSX1200-E11-MOD Installing the CSX1200-U4-MOD Cabling Direct Connection Accessing the CyberswitchMaking Connections NULL-MODEM Connection to a PC Changing the Baud Rate Remote Connection Using Telnet Remote Connection Using a Modem Establishing AN Administration Session Powering on Admin Accessing the Release Notes Upgrading Software Upgrading System SoftwareCD File Structure Product Country or Directories Switchtype Upgrading Software Local Software Upgrade Remote Software Upgrade This message is displayed Flash recover Console Messages during SSB Upgrade Change Defaults to Secure System Return Configuration to Factory Defaults Basic Configuration Configuring Basic Bridging Configuration Tools Executing Cfgedit Saving Cfgedit Changes Dynamic ManagementExecuting Dynamic Management Utility Dynamic Management Commands Saving Dynamic Management Changes Default Configuration Using the Network Worksheets Using the Configuration Chapters Configuring Resources Using Cfgedit Configuring Resources and LinesResources United States Resource Configuration Elements Resource Background Information PPP Configuring Lines Using Cfgedit Lines Multiframe CRC Characteristic PRI/T1 lines E1 lineCommonChannel Line Configuration Elements Auto TEI Directory Numbers Switch Type Number of Data Number of SPIDsDMS100 custom NI-1 Service Profile ID Spid Robbed Bit Signaling is not supported for the CyberSWITCH Commport Information Line Background Information Subaddresses Configuring a Subaddress Using CfgeditSubaddress Configuration Elements Subaddresses Background Information Select Enable/Disable Bridging Configuring Basic BridgingENABLING/DISABLING Bridging Using Cfgedit MAC Layer Bridging Configuration Elements MAC Layer Bridging Background Information Enabling IP Using Cfgedit Configuring Basic IP RoutingInternet Protocol IP Option Configuring the IP Operating Mode Using Cfgedit IP Operating ModeIP Option Configuration Elements IP Background Information IP Operating Mode Configuration Elements IP Operating Mode Background Information Configuring Interfaces Using Cfgedit IP Network Interfaces USER’S Guide Network Interface Configuration Elements MTU Transmit Broadcast IP Address Default switch for numbered WAN interfaces IP RIP Receive Control IP Network Interface Background Information WAN Direct Host IP Host RFC1294 IP Network Interface Type Associated Remote DeviceIP Host RFC1294 Hdlc Bridge USER’S Guide Example 1 LAN, WAN and WAN Direct Host Interfaces Example 2 LAN, WAN UnNumbered, WAN Remote LAN Interfaces IP RIP and the IP Network Interfaces Isdn Isdn IP RIP Over Dedicated Connections SITE3 Network Flattening Redundant Configurations for BackupProxy ARP Secondary IP Addressing Example IP Host Communications in Flattened Networks Configuring Static Routes Static Routes IP address for the destination network or host Static Route Configuration Elements Workgroup Remote Access Switch Isdn Static Route Background Information Configuring Default Routes Default RoutesDefault Route Configuration Elements ENABLING/DISABLING IP RIP Using Cfgedit Routing Information Protocol RIP Option IP RIP Background Information IP RIP Configuration ElementsIP RIP Status LAN Configuring Security Level Security Security Overview Security Level System Options and Information Device Level Databases User Level Databases Network Login InformationOFF-NODE Server Information Configuring Security Level Database Device Level User Level Administration Security On-Node Yes Configuring no Security Using Cfgedit No Security Device Level Security Configuring Device Level Security Using CfgeditDevice Level Security Background Information User Level Security Configuring User Level Security Using CfgeditUser Level Security Background Information User Level Security Isdn Responding to Login Prompts Making a Telnet Connection Tacacs Configuring Device and User Level Security Using CfgeditDevice and User Level Security ACE Device and User Level Background Information Configuring System Options Using Cfgedit Configuring System Options and InformationSystem Options System Options Configuration Elements System Options Bridge MAC Calling Line Id Authentication Address PAP Chap System Options Background Information PAP Chap System Information Configuring System Information Using CfgeditSystem Information Configuration Elements Optional Calling Line Id Configuring Administrative Sessions Using Cfgedit Administrative SessionSystem Information Background Information Administrative Session Configuration Elements Administrative Session Background Information Emergency Telnet Server Port Number Background Information Configuring AN ON-NODE Device Database Configuring Device Level DatabasesON-NODE Device Database Configuring ON-NODE Device Entries ON-NODE Device Entries On-node Device Entries No pvc configured for Device DAN SVC 0.0 Routing Device ON-NODE Device Database Configuration Elements DIAL-OUT Phone Numbers Chap Secret Outbound Authentication RIP/SAP Appletalk Information Configuration Elements Bridge Information Configuration Elements ON-NODE Device Database Background Information Bridging with Hdlc Bridge Devices IP Routing with Hdlc Bridge Devices Security Mode On-node Device Table Configuration DataLine Id IP Routing with IP Host Devices RFC1294 IP Routing with PPP IP Devices Using IpcpPAP or Chap PAP Password or Bridging with PPP Bridge Devices Using BCPIP Routing with PPP Bridge Devices Using BCP Configuring OFF-NODE Device Database Location Using Cfgedit OFF-NODE Device Database Location OFF-NODE Device Database Location Configuration Elements OFF-NODE Device Database Location Background Information User Level Authentication Database Location Configuring User Level DatabasesConfiguring Authentication Database Location Using Cfgedit User Level Authentication Database Location Name John Doe Name mynode1 Address Remote Office1 Configuring OFF-NODE Server InformationMultiple Administration Login Names Type communications server VRA Manager Authentication Server Configuring VRA Manager Authentication Server VRA Manager Authentication Server Background Information Radius Authentication ServerVRA Manager Authentication Server Configuration Elements Configuring a Radius Authentication Server Displays the current Radius server configuration data Radius Authentication Server Configuration Elements Radius Authentication Server Background Information Tacacs Authentication Server Configuring a Tacacs Authentication Server Tacacs Authentication Server Configuration Elements Tacacs Authentication Server Background Information ACE Authentication Server Configuring AN ACE Authentication Server ACE Authentication Server Configuration Elements ACE Authentication Server Background Information Network Login General Configuration Configuring Network Login InformationConfiguring General Network Login Information Using Cfgedit Network Login General Configuration Background Information Configuring Network Login Banners Using Cfgedit Network Login BannersNetwork Login Banners Background Information Login Configuration Specific to Radius Server Configuring Radius Server Login Information Using Cfgedit Login Configuration Specific to Tacacs Server Configuring Tacacs Server Login Information Using Cfgedit Login Configuration Specific to Tacacs Server Login Elements Specific to Tacacs Advanced Configuration Configuring Alternate Accesses Configuring a Dedicated Access Using Cfgedit Configuring Alternate AccessesDedicated Accesses Dedicated Access Configuration Elements Dedicated Access Background Information Accesses Configuring AN X.25 Access Accesses USER’S Guide Configuration Elements Lapb Configuration Elements Timers Maximum Window Size Nonstandard Default Transmit Window Size PVC Configuration Elements Access Background Information B1 B2 Frame Relay Accesses Configuring a Frame Relay Access Configuring a PVC Frame Relay General Configuration Elements LMI Format Frame Relay PVC Configuration ElementsLMI Dlci Value PVC Name Frame Relay Access Background Information Local Management Interface Overview Allowed Not Allowed Configuring Advanced Bridging Bridge Dial OUT Under ISDN, select Dial Out Phone Number Bridge Mode of Operation Spanning Tree Protocol Bridge Mode of Operation Background Information Configuring Bridge Filters Using Cfgedit Bridge Filters Destination MAC Filter Commands Protocol Definition CommandsSource MAC Filter Commands Protocol Filter Commands Bridge Filter Configuration Elements Packet Data Filter CommandsLsap in HEX Filter Type Maximum Number of Each Bridge Filters Background InformationFilter Destination MAC Protocol Definitions Unrestricted Mode Bridge Filters Source Discard Connect Destination Protocol Packet USER’S Guide On any LAN port. The packet will be sent to remote Filter Action Distribution Result ListPacket matching this filter will not be forwarded Sites connected over the WAN according to Restricted Mode Bridge Filters Restricted Mode Forwarding Action Workgroup Remote Access Switch Ed on the LAN ports. The packet will not be sent to Filter Distribution Result Action ListPacket matching this filter will only be forward Any remote sites connected over the WAN Configuring a Destination MAC Address Filter Preliminaries Discard Connect Configuring the Known Connect List Known Connect List Known Connect List Configuration Elements Known Connect List Background Information Configuring Advanced IP Routing Static ARP Table Entries Static ARP Table Entries Configuring Static ARP Table Entries Using CfgeditStatic ARP Table Entries Configuration Elements Select Static ARP Table Entries from the IP menu Isolated Mode Static Route Lookup VIA Radius IP Address Pool Configuration Elements Static Route VIA Radius Configuration ElementsConfiguring AN IP Address Pool Using Cfgedit IP Address Pool IP Filters Initiating the IP Filter Configuration Using CfgeditIP Address Pool Background Information Configuring Packet Types Using Cfgedit Mask TCP UDP Icpm Specify a control value any, established, or not established Select Icmp Type Configuring Forwarding Filters Select Add a Forwarding Filter Configuring Connection Filters Configuring Exception Filter Select Apply Global Forwarding Filter Applying FiltersSelect IP Interfaces Select Device Level Databases Select On-node Device Entries IP Filters Configuration Elements Range TCP and UDP PortsNEQ IP Filters Background Information Packet Types Forwarding Filters Connection Filters Exception Filters Application to Network Interfaces Common Portion Limitations Example of AN IP Filter Configuration FTP WWW Sfvra Forward Configuring a Dhcp Relay Agent Using Cfgedit Dhcp Relay Agent Dhcp Configuration Elements Dhcp Background Information Bridge to Bridge Environment Router to Bridge Environment IP Router to IP Router with Relay Agents on both USER’S Guide Remote Bridge to IP Router w/Relay Agent = WAN Rlan Dhcp Proxy Client Configuring the Dhcp Proxy ClientSelect Dhcp Proxy Client Dhcp Proxy Client ENABLE/DISABLE Flag Sample Configuration IP Router with Dhcp Proxy Client Configuration for IP Router Chloe Configuring IPX Configuring IPX Information IPX Option Configuration Element ENABLING/DISABLING IPX Using CfgeditIPX Routing Option IPX Internal Network Number Configuring the IPX Internal Network Number Using CfgeditIPX Internal Network Number Configuration Element IPX Option Background Information IPX Network Number Background Information Configuring IPX Network Interfaces Using CfgeditIPX Network Interfaces LAN WAN Displays the current IPX network interface data IPX Network Interface Configuration Elements SAP IPX Network Interface Configuration Elements IPX Network Interface Background Information IPX Routing Protocol Configuration Elements Configuring IPX Routing Protocols Using CfgeditIPX Routing Protocols IPX Routing Protocol Background Information SAP Special Considerations Remote LAN Interface Configuring IPX Static Routes Using Cfgedit IPX Static Routes IPX Static Routes Configuration Elements IPX Static Routes Background Information IPX Netware Static Services Configuring IPX Netware Static Services Using Cfgedit IPX Netware Static Services Configuration Elements Configuring IPX Spoofing Using Cfgedit IPX Netware Static Services Background InformationIPX Spoofing IPX Spoofing Configuration Elements IPX Spoofing Background Information Watchdog Protocol Configuring IPX Type 20 Packet Handling Using Cfgedit IPX Type 20 Packet Handling Configuring IPX Isolated Mode Using Cfgedit IPX Isolated ModeIPX Type 20 Packet Handling Configuration Elements IPX Isolated Mode Configuration Elements IPX Isolated Mode Background Information Displaying WAN Peer List Configuring Triggered RIP/SAP Global Timers Using Cfgedit IPX-SPECIFIC Information for Devices Configuring IPX DevicesTriggered RIP/SAP Background Information IPX-Specific Information for Devices SPX Watchdog Spoofing Menu Enable Bridging and disable Make calls for bridge data IPX Configuration Elements for Devices IPX Background Information for Devices Configuring Snmp Configuring Snmp Configuring Snmp Snmp Configuration Elements Snmp Background Information WAN Workgroup Remote Access Switch USER’S Guide Enabling Appletalk Routing Using Cfgedit Configuring Appletalk RoutingAppletalk Routing Option Appletalk Ports Appletalk Routing Option Configuration ElementConfiguring Appletalk Ports Using Cfgedit Appletalk Routing Background Information Appletalk Ports Configuration Elements Appletalk Ports Background Information Overview Appletalk Static Routes ConfigurationConfiguring Appletalk Static Routes Using Cfgedit Considerations Appletalk Capacities Configuration Elements Appletalk Routing Static Routes Configuration ElementsConfiguring Appletalk Capacities Using Cfgedit Appletalk Capacities Appletalk Isolated Mode Configuration Elements Appletalk Isolated ModeConfiguring the Appletalk Isolated Mode Using Cfgedit Appletalk Capacities Background Information Configuring the Throughput Monitor Using Cfgedit Configuring Call ControlThroughput Monitor Throughput Monitor Configuration Elements Condition Trigger Number Window Size Utilization Throughput Monitor Background Information90% Overload Condition Monitoring Idle Condition Monitoring Call Interval Parameters Configuring the Call Interval Parameters Using CfgeditCall Interval Configuration Elements Call Interval Background Information Monthly Call Charge Configuring Monthly Call Charge Using CfgeditMonthly Call Charge Configuration Elements Monthly Call Charge Background Information Call Restriction Configuration Elements Configuring Call Restrictions Using CfgeditCall Restrictions Call Restrictions Call Restrictions Background Information Configuring Bandwidth Reservation Bandwidth Reservation = CentralSite Bandwidth Reservation Configuration Elements Select Bandwidth Reservation Semipermanent Connections Configuring Semipermanent Connections Using CfgeditBandwidth Reservation Background Information Semiperm Call Device Commands Semipermanent Connections Configuration ElementsSemipermanent Connections Background Information Call Restrictions Throughput Monitor Configuring VRA Manager for Call Control Using Cfgedit VRA Manager AS a Call Control Manager Background Information LIMITATIONS/CONSIDERATIONS PPP Configuration Configuring Other Advanced OptionsConfiguring PPP PPP Configuration Elements PPP Background Information PPP Reference Documents Default Line Protocol Configuration Elements Default Line ProtocolConfiguring Default Line Protocol Using Cfgedit Default Line Protocol Background Information LOG Options Configuring LOG Options Using CfgeditLOG Options Configuration Elements UDP Port LOG Options Background Information CDR LOG Report Overview Call Detail Recording Events Event Report Contents Connect Event Report Contents Reject Event Report Contents Disconnect Event Report ContentsSystem Up Event Report Contents Compression Options Configuration Elements Verify Event Report ContentsConfiguring Compression Options Using Cfgedit Compression Options Compression Options Background Information Compression and CCP Configuring Tftp Tftp Tftp Configuration Elements Tftp Background Information File Attributes Configuring File AttributesFile Attributes Configuration Elements File Attributes Background Information RPRTLOG.1 Users Report Files StatFiles CfgFiles Other FilesFile category File types included in the category STATLOG.1 Troubleshooting System Verification System Verification Verifying Hardware Resources are Operational Verifying WAN Lines are Available for USE Verifying LAN Connection is Operational Verifying Bridge is Initialized Verifying IP Router is Initialized Verifying a Dedicated Connection Verifying a Frame Relay Connection Verifying Remote Device Connectivity Verifying AN X.25 ConnectionVerifying MULTI-LEVEL Security Ping 100.0.0.2 return Verifying IP Host Mode is Operational Verifying IP Host Mode is OperationalVerifying IP Host is Initialized Verifying IP Routing Over Interfaces Verifying IP Routing Over a LAN Interface Verifying IP Routing Over a WAN Interface 100.0.0.1 100.0.0.0 Host B 192.100.1.3 Host a 100.0.0.2 Verifying IP Routing Over a WAN Direct Host Interface Verifying IP Routing Over a WAN Remote LAN Interface Verifying IP Routing Over a WAN Unnumbered Interface Ip filter trace discard return Verifying IP FiltersVerifying IP RIP Verifying IP RIP is Initialized Verifying IP RIP Output Processing on a LAN Interface Verifying IP RIP Input Processing on a LAN Interface Verifying IP RIP Output Processing on a WAN Interface CSX1200 Router Dedicated Connection 100.1.1.1 192.1.1.1 Verifying IPX Router is Initialized Verifying IPX Routing is Operational Verifying AN IPX Remote LAN Connection Verifying IPX Routing Over a LAN ConnectionXxxx Verifying Triggered RIP/SAP Verifying the Appletalk Routing FeatureVerifying IPX Routing Over a WAN Connection Verifying Appletalk Routing is Initialized Verifying Appletalk Routing is Operational Verifying Appletalk Routing Operation Over a WAN Connection Verifying Snmp is Operational Verifying the Dial OUT Feature Verifying Call Detail Recording Verifying Reserved Bandwidth is Operational Verifying Compression is OperationalVerifying PPP Link Failure Detection is Operational Verifying Dhcp Relay Agent Verifying Dhcp Relay Agent Initialization Verifying the Relay Agent is Enabled Verifying the Relay Agent is Operational Verifying Dhcp Proxy Client Verifying Dhcp Proxy Client Initialization Verifying the Proxy Client is Operational Verifying the Proxy Client is EnabledUDP Ports Verifying a Semipermanent Connection Verifying Proxy ARP is Operational Verifying Proxy ARP is Operational Problem Problem DiagnosisGeneral Procedures LAN Adapter IP Routing Initialization Bridge InitializationWAN Line Availability Out Svc 1 slot #, port # Dedicated Connections Frame Relay Connections Connections Remote Device Connectivity Set-up MULTI-LEVEL Security DisabledLAN Attachment IP Host Mode Operation Over the LAN Connection IP Host ModeIP Host Initialization IP Routing Over Interface Connections IP Host Mode Operation Over the WAN ConnectionIP Routing Over the LAN Interface Connection IP Routing Over a WAN Interface Connection IP Routing Over a WAN Direct Host Interface Connection IP Routing Over a WAN Rlan Interface Connection IP Routing Over a WAN Unnumbered Interface Connection If you are still experiencing problems IP RIP Initialization IP RIP Output Processing on a LAN Interface IP RIP Input Processing on a LAN Interface IP RIP Output Processing on a WAN Interface IP RIP Input Processing on a WAN Interface IPX Routing Initialization IPX RoutingIPX Routing Over the LAN Connection IPX Routing Over the Remote LAN Connection IPX Routing Over the WAN Connection IPX Routing and Service Tables Triggered RIP/SAP Start UP Appletalk RoutingTriggered RIP/SAP Operation Appletalk Routing Initialization Appletalk Routing Operational Over the LAN Connection USER’S Guide Appletalk Routing Operational Over the WAN Connection Snmp CyberSWITCH does not generate Snmp Trap PDUs Set Up Dial OUT Call Detail Recording Successful Negotiation CompressionPeer Protocol-Rejects CCP Relay Agent Initialization CyberSWITCH does not have Compression EnabledEnabling the Relay Agent Relay Agent Operation Proxy Client Initialization Enabling the Proxy Client Proxy Client Operation Proxy ARP Operation Proxy ARP Operation LED Indicators Local Area Network LED Indicators PRI LED Indicators Lanview Leds CSX1200-E11-MOD Receive LEDs OFF Service Indicator Service Indicator Remains LIT Service Indicator Blinks OUT SVC LAN Xmit Error Alarm Leds PRI only Alarm LEDs PRI Only System Messages Informational Messages Normal Operation Messages Boot MessagesInitialization Messages Status Messages System Message Summary Error MessagesSpanning Tree Messages Call has exceeded the configured maximum duration Port LAN Adapter, operating in remote mode onlyPort LAN Adapter, operating in local and remote mode Adapter #’x’ failed to respond from bootstrap Auth ACE Could not create service file Attempting to load FileName for UpgradeAttempt to initialize unconfigured DM card in slot slot # Auth ACE Could not write service file Auth ACE Login rejected user user name Auth ACE Encryption configured for DES not supportedAuth ACE Error receiving server log message acknowledgment Auth ACE Node verification received Client initialized Auth Radius IP Resolve rejected IP Address IP address Auth Radius Login rejected device device nameAuth Radius IP Host rejected IP Host id IP host Id Auth Radius PAP rejected device device name Auth Warning code 0004 No authentication node available Auth Tacacs Login rejected user user nameAuth Warning code 0001 Timeout Auth Warning code 0007 Authentication mode mismatch Bootstrap came alive on WAN card in slot slot # Booting System SoftwareBootstrap came alive on DM card in slot slot # Bad auth result in smgrauthaanotify for device device name Calculating CRC’s Call Restrictions have been disabled by user commandCall Restrictions have been enabled by user command Calling Line ID Failure, Duplicate ID calling line Id Call Restrictions will allow calls to be made this hour Call Restriction statistics reset for new dayCall Restriction statistics reset for new month Call Restrictions will allow calls to be made Workgroup Remote Access Switch CCP Internal Decompression Failure Cause cause code received for Dlci dlci indexCause Code Event CCP Option Negotiation Failure, Non-Convergence detected Chap Authentication Failure remote device not responding Channel in use in Hostcallrequest Current monthly charges reset for new month Configured adapter # ’x’ type does not existCouldn’t find speech service slot #, port # CNTR-TMRTimed out waiting for TMR number interrupt DHCP-P Failed to open UDP port for first Dhcp client Dedicated connection down slot #, port #DHCP-P Failed to close UDP port x, erc = y DHCP-P Failed to open UDP port x, erc = y DHCP-R Relay Agent disabled DHCP-P Proxy Client disabledDHCP-P Proxy Client enabled DHCP-P Proxy Client initialization failed DHCP-R UDP port 67 closed DHCP-R Relay Agent enabledDHCP-R Relay Agent initialization failed DHCP-R UDP port 67 opened DM card in slot slot # will not come out of reset DM card in slot slot # signals it is operationalDM card type configured in slot slot # does not exist DM upgrade started. Board=board #, Modem=modem # Edrv transmit error error code DM upgrade success. Board=board #, Modem=modem #Downloading Bootstrap to DM card in slot slot # DSL test failed to establish Layer 1, port=port # Error downloading operational software to adapter ’x’ Error closing file ’s’Error downloading bootstrap program to adapter #’x’ Error during channel initialization Access access index Error opening file \system\ethernt2.bin Error mapping WAN adapter #’x’ into Host memory mapError parsing old WAN Direct Host interface bad format Error programming adapter #’x’ hardware Error sending message to Call Control Error reading sdconf.rec fileError requesting slot activation Facility not subscribed Slot=slot # Port=port # Failure during Static RAM test on adapter # ’x’ Failed to obtain Terminal info in smgrprocterminalauthsessFailure during read of file ’s’ Failure to allocate enough memory for Xilinx load file USER’S Guide Frietf detected PPP protocol from NAME, shutting down PVC File Access ErrFormatting Flash Memory Frame Relay event queue full FrUtl No registered device for Dlci dlci index Installing File Set into Flash MemoryInterrupt fault on WAN Adapter in Slot slot # Initial TDM Clock Master slot#, line# IP Error from ESP datagram discarded Invalid Cllm received on Access access indexInvalid Password password given IP x.x.x.x not added to the pool Unknown error y Ipap ResMem returned invalid device maximum value IP Default Route not added, invalid next hop IP address #IP Invalid configuration for Network Interface dd IP Cannot get system memory for IP IP router is initialized successfully IP Invalid Peer IP Address IP address, WAN IP Stream ClosedIP IP host is initialized successfully IP Network initialized successfully on ddd.ddd.ddd.ddd Ipcp Remote device does not negotiate IP address Ipcp IP Address Pool Out of IP addressesIpcp Option Negotiation Failure, Non-Convergence detected IP Host Call Dropped XID was not received from remote IP RIP Buffers allocated IP Host Security Rejection Invalid Security ID Id stringIP RIP All network interfaces used IP RIP Initialization failed, unable to allocate buffers IPX Invalid Ipxwc passed IP RIP Unable to open RIP/UDP portIP RIP Unable to register WAN Connection notification IPX Network initialized successfully on Ipxwan IPX Internal Network Number must be configured IPX SAP Space available in service tableIPX SAP Unable to add service, service table full IPX RIP Shutdown complete LAN Adapter Fatal Error Reported LAN Adapter Command TimeoutLAN Adapter configuration conflict LAN Adapter HW upgrade may be required LAN Adapter System resource error LAN Adapter ResetLAN Adapter Response Timeout LAN Init Error LMI alarm reset Access access index LAN Xmit ErrorLMI alarm on Access access index LAN Port port # detected shorted LAN media Manual intervention required please replace LAN card Manage Mode updates have been successfully committedMemory Access Timeout Manual restart initiated on DM board in slot slot # Modem revision on modem modem # of slot slot # failed Mismatch of configured and installed DM card in slot slot #Modem modem # of DM card in slot slot # is unusable Negotiation Failure with Semipermanent device No Active Calls Active Sites Network sent Cause Spid not supported slot #, port #Network sent Status with state = 0, tear down call No Active List entry available in INM Offnode server lookup of Dial Out User failed Out of LAN Adapter transmit command descriptorsNot enough memory for Security module Outgoing calls barred Slot=slot # Port=port # PAP Invalid password for name given by remote device Auto For over 5 minutes Report problem to Phone companyPAP Identification timeout on remote device Out Svc # slot # , port # Post number, Hdlc #number External Loopback Test Failed PAP Remote device rejected System Information error messagePAP Unknown name name given by remote device Post number, Hdlc #number Internal Loopback Test Failed PVC for Dlci dlci index not Active RBS LIFAddTimer failureRBSoutSMchannel # Timeout waiting for Wink PVC not allocated for dlci index Replace Lithium Battery Contact your Representative Reattempting to Install File Set into Flash MemoryRebooting Reserved signal Rx Channel Inactivity Detected Security Rejection Invalid Password password givenRetrying download of DM card in slot slot# in x seconds Security Rejection Caller did not negotiate security Semipermanent. Device x disconnected by admin Security Rejection No Password given by callerSecurity Rejection Timeout on Startup Complete Security Rejection No Protocol List supplied Slot #, port # Cfg Error Semipermanent. Device x reconnected by adminSignal for unknown CallCmd task task Id Snmp Authentication failure, unknown community name SSB Couldn’t read RTC during i960 POSTs SSB Post 27 i960timer82c54FAILURESSB Can’t read RTC prior to i960 POSTs SSB i960 Post number not equal to i386’s SSB Post 30 i960permodmem1 Failure SSB Post 28 i960lan82596sx FailureSSB Post 29 i960lan82503 Failure SSB Post 31 i960permodmem2 Failure System Clock Fault on Wan Adapter in Slot slot # Successfully Loaded Release X.Y Issue ZSwitch could not recognize phone number nnnnnnn STP a Blan Topology Change has been detected Tftp Local error #4 UDP rejected packet filename Tftp Local error #2 Feature not initializedTftp Local error #3 Server not initialized Tftp Local error #5 UDP open failed Tftp Local error #15 Bad mode string Tftp Local error #13 Received unexpected opcode filenameTftp Local error #14 Bad file name Tftp Local error #18 Unable to open file filename Tftp Remote error # 2 Text from Remote Host Tftp Remote error # 0 Text from Remote HostTftp Remote error # 1 Text from Remote Host Tftp Remote error # 3 Text from Remote Host Timeout detected on receiving caller’s number Compression subsystem is not enabledTimeout detected on connection establishment Timeout on Startup Complete Unable to Decrypt Datagram Type mismatch of configured & installed adapter # ’x’Unable to get Digital Modem resource to place call Unable to restore original ISRs for Interrupt interrupt # Unable to open \config\devdb.nei fileUnable to open Modem Upgrade file Unable to Identify a remote device Updating CyberSWITCH from FileName Unexpected error during transmission of LMI frameUnmatched Login Task WAN card in slot slot # signals it is operational X25 facilities error, facilities not allowed in PVC Watchdog timeout detected on DM board in slot slot #Watchdog timeout detected on WAN board ’x’ X25 facilities error, bad facility length X25 facilities error, fast select not accepted X25 facilities error, reverse charging not acceptedX25 facilities error, fast select not available X25 facilities error, throughput negotiation not allowed X25 facilities warning, NUI not available Zone allocation failed, maximum capacity already configuredZone allocation failed, increase zone table capacity Trace Messages Call Trace Messages Location Causes Call Trace Message Summary Inband treatment has been applied Configure ack slot #-BRD CFG ACK Slot=slot # Init data link slot #, port #, ces Off-hook warning tone on Out configure port #Interworking unspecified cause Origination call address is non-ISDN Recall dial tone on Received unknown signal valueOut init data link slot #, port # , ces Received unknown progress value IP Filters Trace Messages PPP Packet Trace Messages Configure NAK Configure RequestConfigure ACK Configure Reject Discard Request Trace MessagesEcho Reply Trace Message Summary X25 Data LCN logical channel number, number of bytes bytes X25 DCE RR LCN logical channel number, number of bytes bytes System is sending a call request to the network Lapb Trace Messages Lapb Trace Message Summary Out Lapb Disc Lapb SabmeLapb UA Out Lapb DM System Maintenance Remote Management Remote Management Installation and Configuration SITE.2 Usage Instructions Telnet Earlier Releases Usage Instructions Tftp Client PC Users Report Files Statistics Files Config files Other Files Remote Installation with USER2 USER’S Guide System Commands Accessing Administration Services Setting the IP Address Boot Device Commands Accessing Dynamic Management Viewing Operational Information List relnote.txt Viewing Operational Information Status Second column is the potential number of connections Viewing Throughput Information 100 Throughput Monitor Contents Saving Operational Information CONFIGURATION-RELATED Commands Clearing Operational Information Setting the Date and Time Restarting the CyberswitchFile Utility Commands Terminating Administration Sessions Login-Id Appletalk Routing Commands Type State Flags Default zoneNetwork range LAN port Distance Zones valid Zone Bridge Commands Call Control Commands Device name must be re-entered Calling phone number at data rate, device PPP Call Detail Recording Commands Call Restriction Commands Dhcp Commands Compression Information CommandsFrame Relay Commands Clears all statistics associated with the fr stat command IP Routing Commands Disables the trace Valid Icmp Echo Reply was received from host ddd.ddd.ddd.ddd Mask used for the destination Age of the route in seconds IPX Routing Commands Ipx ping host ipx address Isdn Usage Commands Isdn usage LOG Commands LAN CommandsPacket Capture Commands All packets will be captured Following is an example pkt display screen Banyan Vines Packet Detail Screen Bridged Packet Radius Commands Radius ipres TCP Commands Snmp CommandsTelnet Commands Used to close the current Telnet connection to a target host Possible send parameters are defined as follows Terminal Commands Tftp Commands Tftp GET Trace Commands Tftp Session UDP Commands User Level Security Commands WAN Commands Commands Clears the statistics for the default VC Connectivity Statistics System StatisticsCall Restriction Statistics Call Statistics Throughput Monitoring Statistics Appletalk Statistics Appletalk Protocol Statistics Number of AppleTalk Echo requests received Count of AppleTalk Echo replies received Number of NBP LookUp Requests received Appletalk Port Statistics Bridge Statistics Call Detail Recording Statistics Compression Related Statistics Compression StatisticsDecompression Related Statistics Dhcp Relay Agent statistics and Dhcp Proxy Agent statistics Dhcp StatisticsCommon Dhcp Statistics Dhcp Relay Agent Statistics Dhcp Proxy Client Statistics Access Related Statistics Frame Relay Statistics Not currently supported PVC Related Statistics LAN Statistics IP Statistics IP Group Statistics Icmp Group Statistics Number of Icmp Destination Unreachable messages received IPX Statistics IPX General Statistics Number of IPX packets received with incorrect checksums IPX RIP Statistics IPX Triggered RIP Statistics IPX Route Statistics IPX Service Statistics IPX Triggered SAP Statistics RIP Global Statistics RIP StatisticsRIP Interface Statistics Snmp Statistics SnmpInReadOnlys TCP Statistics Tftp Statistics Statistics for Server or Remote Initiated Tftp Activity Statistics for Local or Client Initiated Tftp Activity Statistics for ALL Tftp Activity UDP Statistics WAN Frietf Statistics Layer 1 PRI Error Statistics Layer 1 General Statistics WAN Statistics Statistics Virtual Circuit VC Related Statistics Local DTE X.121 address Executing Configuration Changes Routine MaintenanceINSTALLING/UPGRADING System Software Making Changes Using Cfgedit Making Changes Using Manage Mode Configuration Backup and RestoreObtaining System Custom Information Appendices System Worksheets System Worksheets Network Topology Resources System DetailsLines Accesses Authentication Information Frame Relay Information Device Information Bridging and Routing Information IP Routing IPX Routing Appletalk Routing AppleTalk Routing/Port Information Snmp PPP Main MenuIPX FR DBU Hdlc PPP FR DBU Physical Resources MenuDES, Feal BPS WAN Rlan Options MenuDhcp Snmp FR DBU Isdn Security MenuRadius Tacacs ACE SVC, PVC PPP STAC-L25 VRA Manager TCP port Getting Assistance Reporting ProblemsContacting Cabletron Systems Phone FAX Cabletron Systems System Problem Report To Customer Service FromNumber of Pages Including this Displays help screen Administrative Console Commands TableCommand Use Displays or clears current AppleTalk port statistics Clears administration screen Command Use Cdr stats clearVerifies call detail recording servers are configured Clears current call detail recording statistics Dlci Log cdr erase Generates a triggered RIP/SAP update request toLocal log file only displays the call detail recording log Local log file only erases the call detail recording log Changes password for current access level Displays system errors and system messages Displays current software version and hardware resource Displays the current Tftp statisticsRevision information Access or the specified access Specified X.25 access Manage Mode Commands Table Adds/changes/deletes an IPX address from the IPX Ipxspoof Allows you to configure system level spoofing dataAddress pool Manage Mode Commands Table USER’S Guide Cause Codes Table USER’S Guide Cause Codes Table USER’S Guide Workgroup Remote Access Switch USER’S Guide Dec Value Hex Value Cause Unknown CDR IndexBr stat Cdr 534 cfg Date Cmp 535 commandsDel 524 destfilt Device 162 Device add Ip addrpool 535, 537 IP filters 241 Ipcp Lan test 355 Lanview LEDs 420 Lapb IsdnLan 545 LAN adapter Led status 518 line NTT INS STAC-LZS Spid Restart 523 restoreSentry Srcfilt Term 554 term set 357 terminal mode Udp Wr 52, 521 ws 52 X25