Cabletron Systems CSX1200, CSX1000 manual Select Bandwidth Reservation

CONFIGURING CALL CONTROL

Bandwidth Reservation

5.Under ISDN information, enter the profile information. This is a profile name you configured in the previous section. Remember from the previous section that each configured profile reserves specific lines. By assigning this profile to the device, you are reserving specific lines for this device.

To enable the bandwidth reservation feature:

1.Return to the Options Menu (selection 2 of the main menu).

2.Select Bandwidth Reservation.

3.Follow the onscreen instructions to enable the feature.

USING MANAGE MODE

profile

Displays the current profile table.

profile [add] [change] [delete]

Allows you to add, change or make deletions from the current profile table.

bwres [on] [off]

System-level command which enables/disables the bandwidth reservation feature.

device [add] [change] [delete]

Allows you to assign a device to a profile.

BANDWIDTH RESERVATION CONFIGURATION ELEMENTS

DEFAULT PROFILE

The Default Profile is the available profile for all valid devices not identified with a specific device profile. The Default Profile initially contains all of the BRI lines configured in the Physical Resources section of CFGEDIT. When data lines are added, changed or deleted through CFGEDIT’s Physical Resources section, they are automatically added, changed or deleted in the Default Profile.

The Default Profile entry cannot be deleted, nor have its name changed. However, it may be mod- ified to remove lines from general usage.

DEVICE PROFILE

The Device Profile entry identifies which line or lines are reserved for a particular profile. The profile name must be a string of 1 to 17 alphanumeric characters, including the underscore. When selecting a name for a Device Profile, select a name that appropriately identifies the profile (such as Central Office).

LINE

This element identifies the line or lines to be reserved for the specified Device Profile. Overlap of lines between profiles is allowed. Note that this is a BRI-only feature since bandwidth is reserved per-line.

Workgroup Remote Access Switch 325