Cabletron Systems CSX1200, CSX1000 manual Tftp Data buffer allocated successfully

SYSTEM MESSAGES

System Message Summary

[TFTP] Data buffer allocated successfully

All parts of the TFTP feature (both Server and Client) were successfully initialized.

Note: The following “[TFTP] Local error...” messages generated during client operations will be displayed on the console only and will not be logged to disk.

[TFTP] Local error #2: Feature not initialized

The TFTP feature was not initialized properly. No file transfer will be attempted. Check the configuration, and then contact your Distributor or Customer Support.

[TFTP] Local error #3: Server not initialized

The TFTP Server was not initialized. The TFTP Server will not attempt any file transfers. Check the configuration, and then contact your Distributor or Customer Support.

[TFTP] Local error #4: UDP rejected packet <filename>

The UDP subsystem could not send the data because there was a problem with the file. If this message appears consistently, contact your Distributor or Customer Support.

[TFTP] Local error #5: UDP open failed

The UDP subsystem could not open a new port. No file transfer will be attempted. Check the configuration, and then contact your Distributor or Customer Support.

[TFTP] Local error #6: All UDP buffers in use <filename>

All of the TFTP/UDP buffers are in use. There may be a problem with the specified file; try replacing it. If this message appears consistently, contact your Distributor or Customer Support.

[TFTP] Local error #7: Received packet with size zero The TFTP protocol received a packet with no data.

[TFTP] Local error #8: No route defined <filename>

The TFTP protocol was instructed to start a TFTP session with an IP ADDRESS (HOST) for which there is no defined route. There may be a problem with the specified file; try replacing it. If this message appears consistently, contact your Distributor or Customer Support.

[TFTP] Local error #9: File transfer timed out <filename>

The TFTP file transfer timed out. There may be a problem with the specified file; try replacing it. If this message appears consistently, contact your Distributor or Customer Support.

[TFTP] Local error #10: IP addressing inconsistency detected

The TFTP protocol received a packet from a host for which no file transfer was being processed. This should not affect any files being transferred.

[TFTP] Local error #11: Received packets out of sequence <filename>

The TFTP protocol received a data packet that either was too old or one was skipped. There may be a problem with the specified file; try replacing it. If this message appears consistently, contact your Distributor or Customer Support.

[TFTP] Local error #12: Bad packet length received <filename>

The TFTP protocol received a packet that was too big. There may be a problem with the specified file; try replacing it. If this message appears consistently, contact your Distributor or Customer Support.

Workgroup Remote Access Switch 477