Cabletron Systems CSX1200, CSX1000 manual Clears the statistics for the default VC

SYSTEM COMMANDS

X.25 Commands

x25 a <access name>

The “a” option will set the access name specified by <access name> as the default access for subsequent commands entered without an explicit access specifier. This access name will remain the current access, until it is changed through issuing another x25 a <access name> command.

Note: This command may be used with all other x25 commands. For example, x25 a acc1 vc would be a valid command, changing the default X.25 access to “acc1”, and would display virtual circuit information for the X.25 access named “acc1”.

x25 stats

Displays the statistics associated with the X.25 access. Refer to X.25 Statistics for a list of available statistics and their definitions.

x25 vc <LCN>

Sets the default virtual circuit (VC) by specifying the VC’s LCN. This VC will be the default for subsequent vc commands. This VC will remain the default VC, until it is changed through issuing another x25 vc <LCN> command.

x25 vc active

Displays a list of all active VCs for the default X.25 access and LCN.

x25 vc clear

Clears the statistics for the default VC.

x25 vc stats

Displays the statistics for the default VC. Refer to X.25 Statistics for a list of available statistics and their definitions.

Workgroup Remote Access Switch 559