Cabletron Systems CSX1000 EDS-DES Board Absent EDS-FEAL Board Absent, Error closing file ’s’

USER’S GUIDE

EDS-DES Board Absent

EDS-FEAL Board Absent

The encryption board is either physically not in the backplane, or the dip switches on the board are set incorrectly. Check for the board; verify the switch settings.

Error closing file ’s’

The WAN card initialization subsystem encountered an error while downloading a WAN card. The system could not close the download disk file indicated. Restart the system. If the error continues, Contact your Distributor or Customer Support.

Error closing file <file name>, slot <slot # >

Error closing password data file

If seen repeatedly, the above messages indicate a problem with your hard drive. Please contact your Distributor or Customer Support.

Error downloading bootstrap program to adapter #’x’

The WAN card initialization subsystem encountered an error on the indicated adapter while downloading the bootstrap program. Restart the system and review the configuration for the adapter. If the problem persists, the indicated adapter card may be faulty; contact your Distributor or Customer Support.

Error downloading operational software to adapter ’x’

The WAN card initialization subsystem encountered an error on the indicated adapter while downloading operational software. Restart the system and review the configuration for the adapter. If the problem persists, the indicated adapter card may be faulty and you should contact your Distributor or Customer Support.

Error during channel initialization Access <access index>

An error has occurred during the initialization of the indicated Frame Relay Access, or port. Likely cause of this entry is that the system has run out of memory. Contact your Distributor or Customer Support.

Error during port initialization Access <access index>

An error has occurred during the initialization of the indicated Frame Relay Access, or port. Likely cause of this entry is that the system has run out of memory. Contact your Distributor or Customer Support.

Error during PVC initialization Access <access index>

An error has occurred during the initialization of the indicated. Likely cause of this entry is that the system has run out of memory. Contact your Distributor or Customer Support.

Error initializing WAN card: <WAN card Id>

The system could not initialize the specified WAN card during system initialization. Check the WAN card installation and configuration. If the error continues, report the problem.

Error in last LMI message detected Error <error code>

An error was detected in the last LMI message forwarded by the network. The error is identified by the indicated error code.

Error loading WAN board, data verify error: adapter ’x’

The WAN card initialization subsystem encountered an error during download verification. The specified adapter card may be faulty. Contact your Distributor or Customer Support.

446 CyberSWITCH