Cabletron Systems CSX1000 manual CSX1200 Router Dedicated Connection 100.1.1.1 192.1.1.1

SYSTEM VERIFICATION

Verifying IP RIP

perform the verification steps. It also uses the show ip route command. The show ip route command is used by a specific router to display the IP routing table. Substitute the equivalent command for your IP router.

CSX1200

Router

Dedicated Connection

100.1.1.1 192.1.2.1

192.1.1.1100.1.1.2

The steps to verify the operation of IP RIP output processing on a WAN interface are:

1.Make sure that a dedicated connection between system and Router is up and operational. On the system’s administration console:

Type: cs<return>

If the connection to Router is displayed, the continue with the next step.

2.Determine if Router has learned the route to 192.1.1.0 from the system. On the Router:

Type: show ip route<return>

If the route to 192.1.1.0 is displayed, the IP RIP output processing is operational.

If the route is NOT displayed, refer to IP RIP Output Processing on a WAN Interface in the Problem Diagnosis chapter.

VERIFY IP RIP INPUT PROCESSING OPERATIONAL ON A WAN INTERFACE

To verify that IP RIP Input Processing (routes learning) is properly operational on a WAN interface, the IP RIP processing must be successfully initialized.

The same example that is used in the previous section is used to verify IP RIP input processing on a WAN interface.

To verify the operation of IP RIP Input processing on a WAN interface:

1.Make sure that a dedicated connection between system and Router is up and operational. On the CyberSWITCH administration console:

Type: cs<return>

If the connection to Router is displayed, the continue with the next step.

2.Determine if system has learned the route to 192.1.2.0 from the Router. On the CyberSWITCH administration console:

Type: ip route<return>

If the route to 192.1.2.0 is displayed, the IP RIP input processing is operational.

If the route is NOT displayed, refer to IP RIP Input Processing on a WAN Interface in the Problem Diagnosis chapter.

Workgroup Remote Access Switch 369