Cabletron Systems CSX1000, CSX1200 manual 100.0.0.1 100.0.0.0 Host B 192.100.1.3 Host a 100.0.0.2

USER’S GUIDE

192.100.1.1

WORKGROUP REMOTE ACCESS SWITCH

CSX1200

ISDN

LINE	LINE	LINE	LINE
1	2	3	4

100.0.0.1

100.0.0.0

Host B

192.100.1.3

Host A

100.0.0.2

The steps to verify the operation of IP routing over a WAN interface are:

1.Determine if a remote IP host can access the WAN interface of the CyberSWITCH over the WAN connection. On the remote IP host, type:

ping 192.100.1.1 <return>

If the remote IP host successfully pings to the CyberSWITCH, then continue with the next step.

If the remote IP host CANNOT ping to the system, refer to IP Routing Over a WAN Interface Connection in the Problem Diagnosis chapter.

2.Determine if a remote IP host can access the LAN interface of the CyberSWITCH over the WAN connection. On the remote IP host type:

ping 100.0.0.1 <return>

If the remote IP host successfully pings to the CyberSWITCH, then continue with the next step.

If the remote IP host CANNOT ping to the CyberSWITCH, refer to IP Routing Over a WAN Interface Connection in the Problem Diagnosis chapter.

3.Determine if a remote IP host can access the local IP host through the system over the WAN connection. On the remote IP host type:

ping 100.0.0.2 <return>

If the remote IP host successfully pings to the local IP host, then IP routing over WAN type interface is operational. Repeat the above steps for each WAN type interface through which you wish to get access.

If the remote IP host CANNOT ping to the local IP host, refer to IP Routing Over a WAN Interface Connection in the Problem Diagnosis chapter.

362 CyberSWITCH