Cabletron Systems CSX1200, CSX1000 manual Login Configuration Specific to Radius Server

CONFIGURING NETWORK LOGIN INFORMATION

Login Configuration Specific to RADIUS Server

LOGIN CONFIGURATION SPECIFIC TO RADIUS SERVER

CONFIGURING RADIUS SERVER LOGIN INFORMATION

USING CFGEDIT

1.Select option (3), Login Configuration Specific to RADIUS Server from the Network Login Information menu. If you need guidance to find this menu, refer to the instructions provided in the Network Login General Configuration configuration section. The following screen will be displayed:

RADIUS Specific Device Login Menu:

1)Change Password Control Character is DISABLED.

2)Prompt Order for Device Login.

Select function from above or <RET> for previous menu: 1

2.Selection (1) from the RADIUS Specific Device Login Menu allows you to change the password control character:

Enter control character used to switch from LOGIN to CHANGE PASSWORD mode. Select the control character that you wish to us by typing

caret (‘^’) followed by another character (example: ^A), or ‘0’ to disable [Default = DISABLED]? <RET>

3.Selection (2) from the RADIUS Specific Device Login Menu allows you to customize the prompt order for device login. This prompt is particularly important, because the order of prompts must be the same as the order expected by the RADIUS server. Selection (2) displays the following:

RADIUS Device Login Prompt Order Menu:

Current Prompt Order is:

-----------------------------------------------------------------

First Prompt	is	LOGIN ID PROMPT (fixed)
Second Prompt	is	USER PASSWORD PROMPT

1) Prompt Order

Select function from above or <RET> for previous menu: 1

Prompts available for Second Prompt

1)USER PASSWORD

2)DYNAMIC PASSWORD

Select function from above or <RET> for previous menu:

Workgroup Remote Access Switch 191