Cabletron Systems CSX1200, CSX1000 manual IP Routing with Hdlc Bridge Devices, Line Id

CONFIGURING DEVICE LEVEL DATABASES

On-node Device Entries

The following table identifies the configuration requirements for possible security options for remote bridge devices.

Security Mode Configuration		On-node Device Table Configuration Data
Calling Line Id	Bridge Ethernet	Calling Line Id	Bridge Ethernet	Bridge Password
	Address		Address
Enabled	Disabled	Required	Not	Not Requested
			Requested
Disabled	Enabled	Not Requested	Required	Optional per
				device entry
Enabled	Enabled	Conditionally	Conditionally	Optional per
		Required*	Required*	device entry
				(if entry specifies
				an Ethernet
				Address)

*Conditionally Required means you must specify at least one of either the Calling Line Id or the Ethernet Address. You may specify both.

IP Routing with HDLC Bridge Devices

To allow devices to connect to the CyberSWITCH using IP routing through a Bridge device, you must configure a RLAN Interface. IP routing must also be enabled. For each HDLC Bridge using this type of connection, you may need to enter the Device Name, Calling Line Id, Remote Bridge Ethernet Address, Bridge Password, and IP (Sub) Network Number.

The following table identifies the configuration requirements for possible security options for IP Routing with Bridge Devices.

Security Mode			On-node Device Table Configuration Data
Configuration
Calling	Bridge	Calling Line Id	Bridge	Bridge Password	IP (Sub) Network
Line Id	Ethernet		Ethernet		Number
	Address		Address
Enabled	Disabled	Required	Not	Not Requested	Required if only IP
			Requested		Routing is Enabled
Disabled	Enabled	Not	Required	Optional per	Required if only IP
		Requested		device entry	Routing is Enabled
Enabled	Enabled	Conditionally	Conditionally	Optional per	Required if only IP
		Required*	Required*	device entry	Routing is Enabled
				(if entry
				specifies an
				Ethernet
				Address)

*Conditionally Required means you must specify at least one of either the Calling Line Id or the Ethernet Address. You may specify both.

Workgroup Remote Access Switch 171