Cabletron Systems CSX1000, CSX1200 manual Spanning Tree Protocol, Bridge Mode of Operation

USER’S GUIDE

Device Bridging: (Device = "DAN")
1)	IP (sub)network number	None
2)	Bridging	ENABLED
3)	Make Calls for bridge data	None
4)	IPX Network Number	None
5)	IPX Spoofing Options

Id of option to change or press <RET> for previous menu? 3

9.Enable Bridging.

10.Enable Make Calls for bridge data. You must have already configured the device’s phone number (Step 6) before the system allows you to enable this feature.

Return to the Current Device Table. The system notifies you of proper configuration for your new device, or informs you of what you are missing.

SPANNING TREE PROTOCOL

CONFIGURING SPANNING TREE PROTOCOL

USING CFGEDIT

1.Select Spanning Tree from the Bridging menu.

2.Enter the bridge age time.

SPANNING TREE PROTOCOL CONFIGURATION ELEMENTS

BRIDGE AGE TIME

If you are using bridge dial out, you may wish to increase this value to prevent the connection from aging out before the call is made.

BRIDGE MODE OF OPERATION

CONFIGURING THE BRIDGE MODE OF OPERATION

USING CFGEDIT

1.Select Mode of Operation from the Bridging menu.

2.Select the bridge mode of operation. The unrestricted bridge mode is the default.

BRIDGE MODE OF OPERATION CONFIGURATION ELEMENTS

BRIDGE MODE

The forwarding method that the bridge will use to distribute LAN packets to the remote sites and to the LAN ports of the CyberSWITCH. The default value is unrestricted bridging.

220 CyberSWITCH