Cabletron Systems CSX1000, CSX1200 manual Default Configuration, Using the Network Worksheets

USER’S GUIDE

DEFAULT CONFIGURATION

Your CyberSWITCH is shipped with a default set of configuration files that are preinstalled. These configuration files provide basic functions which will allow you to perform initial installation tests with no additional configuration.

The default configuration files will allow IP access over both the LAN and the WAN interfaces. This will allow you to PING, TELNET and TFTP into the CyberSWITCH. For example, these defaults will allow you to TELNET into the system and log in. Once logged in, you may execute any of the console commands available.

Once you perform initial testing, you must set the proper IP addresses. Most of these defaults will be country-independent. As with any set of defaults, there may be specific cases where these are not correct and must be changed before the units are connected to the networks.

Default Configuration Summary:

•Bridging Disabled

•IP Routing Enabled

•IP LAN Interface with IP address 1.1.1.1

•Device Level Security

•CHAP enabled

•USER1 configured as PPP device (USER1 as secret) UnNumbered IP

•USER2 configured as PPP device (USER2 as secret) IP address 002.002.002.003

•Single BRI line and resource configured on country-specific basis (for BRI platforms):

JAPAN:	Point-Multipoint Automatic TEI
	Switch type: NTT INS
EUROPE:	Point-Multipoint Automatic TEI
	Switch type: NET3
	(default country code: Norway)
U.S.:	Point-to-point lines
	BRI_5ESS

•Single PRI line and resource configured on country-specific basis (for PRI platforms):

JAPAN:	Switch type: NTT INS
EUROPE:	Switch type: NET5
	(default country code: Norway)
U.S.:	4ESS

•Single data link (with no SPID) configured (for BRI platforms)

•IP WAN Interface with IP address 2.2.2.2

•TELNET and TFTP enabled

•TFTP allows all files to be changed by ADMIN

USING THE NETWORK WORKSHEETS

Please take the time to fill out the requirements worksheets located in System Worksheets. The requirements worksheets are:

•Network Topology Worksheet

•System Details Worksheet

•System Device List Worksheet(s)

•Bridging/Routing Worksheets

86 CyberSWITCH