Cabletron Systems CSX1000, CSX1200 manual Viewing Throughput Information

USER’S GUIDE

VIEWING THROUGHPUT INFORMATION

The Throughput Monitor screen displays the system throughput monitoring feature in action. To enter this screen:

1.Issue the mc command to display the connection monitor screen.

2.Use the <arrow keys> to move the cursor down to the specific site for which you would like to view throughput information.

3.Press <enter> to display the throughput monitor screen for that site.

Throughput monitoring information can be very useful for fine-tuning your bandwidth configuration parameters. Note that this feature is not available through a Telnet session. Refer to the Configuring Call Control chapter for a complete description of throughput parameters.

The actual bandwidth utilization, along with the current underload setting, is displayed for each throughput sample. After 32 samples are displayed, the newest sample is displayed at position 32 and all other samples are shifted left one position.

Throughput Monitor
	#1	#2
Wide Area Network Bandwidth Utilization to site	sitename	@ current bandwidth Kbps
= UNDERLOAD BANDWIDTH	= ACTUAL BANDWIDTH UTILIZATION
100

% of current
bandwidth			30
			0
				8	16				24	32
							Samples
						Throughput Parameters
		Sample Rate (seconds):						03
			Overload:	Trigger	01			Window	02		Utilization (%) 10
			Underload:	Trigger	05			Window	10
			Idle:	Trigger	05			Window	05		Utilization (%) 10
	< Press		F to Freeze data capture,					Esc to return to Connection Monitor >

520 CyberSWITCH