CONFIGURING ADVANCED IP ROUTING

IP Filters

MODIFYING THE FINAL CONDITION FOR A FILTER

To change the final condition for a filter, select Change Default Condition (currently selection (5) on the Conditions for Filter menu.

APPLYING FILTERS

Once you have defined your forwarding filters, you must apply them to selected points in the IP routing process. There are three ways to apply filters:

through a Network Interface

globally

on a per-user basis

APPLYING FILTERS TO NETWORK INTERFACES

1.Return to the IP Configuration menu (from Options).

2.Select IP Interfaces.

3.Select Change.

4.Select the interface on which the filter is to be applied.

5.Press <RET> until you reach the prompt which asks for Input Filter Name.

6.If you want to apply an Input filter, provide the filter name at the Input Filter prompt. If you do not want to apply an Input filter, press <RET>.

7.If you want to apply an Output filter, provide the filter name at the Output Filter prompt. If you do not want to apply an Output filter, press <RET>.

APPLYING THE GLOBAL FORWARDING FILTER

1.From the IP Routing menu, select IP Filters.

2.Select Apply Global Forwarding Filter.

3.Provide the global filter name.

APPLYING PER-DEVICE FORWARDING FILTERS

1.Return to the Main Menu.

2.Select Security.

3.Select Device Level Databases.

4.Select On-node Device Entries.

Workgroup Remote Access Switch 249

Page 249
Image 249
Cabletron Systems CSX1200, CSX1000 manual Applying Filters, Select IP Interfaces, Select Apply Global Forwarding Filter