WAN Statistics | Cabletron Systems CSX1200, CSX1000 specs

SYSTEM STATISTICS

WAN Statistics

Unknown Events

If this counter is ever non-zero, call Customer Support Personnel.

Unused Events

If this counter is ever non-zero, call Customer Support Personnel.

Unknown Mail

If this counter is ever non-zero, call Customer Support Personnel.

Wrong State

If this counter is ever non-zero, call Customer Support Personnel.

WAN STATISTICS

You can access WAN statistics by issuing the wan stats console command.

data link up

A counter that is incremented every time a data link comes up.

data link down

A counter that is incremented each time a data link goes down.

switched call initiated

A counter that is incremented for each attempt to make a switched call.

switched call completed

A counter that is incremented each time a switched call successfully completes and passes identification.

switched call retry

A counter that is incremented for each retry of an original switched call attempt.

switched call not possible

A counter that is incremented each time a switched call needs to be made to a site and it is not possible.

connection request failure

A counter that is incremented each time a connection is requested and no response has been received after a connection request failure period of time.

rcv fail

A counter that is incremented each time an incoming connection is accepted and no response has been received after a connection receive failure period of time.

wan board recover

A counter that is incremented each time a WAN board is restarted after it originally comes up.

call minutes (day)

The total call minutes that have been logged for the day.

Workgroup Remote Access Switch 593

Image 593

Cabletron Systems CSX1200, CSX1000 manual WAN Statistics

Contents

USER’S Guide Virus Disclaimer Trademarks DOC Notice Contents Ordering Isdn Service US Only Cfgedit Configuration Tools Security Overview Configuring System Options and Information Configuring Off-node Server Information Configuring Advanced Bridging Configuring Advanced IP Routing Configuring IPX Configuring Snmp Configuring Other Advanced Options System Verification Problem Diagnosis LED Indicators System Messages System Statistics Routine Maintenance Cfgedit Map Using this Guide Cfgedit MAP Documentation SET User’s Guide Guide ConventionsCfgedit Screens System Overview CyberSWITCH Cyberswitch Network Cyberswitch Isdn Unique System Features Cyberswitch Interoperability Protocols Interoperability OverviewRadius Interoperability Devices Network Interface Overview Security Overview System Components Isdn Remote Isdn Devices Switches Supported Hardware Overview Safety Considerations CSX1000 and NE Link 1000 a Network Express Product System Platforms CSX1001, shown below, is equivalent to the NE Link 1000 B2 Workgroup Remote Access Switch System Characteristics EMI CSX1200 CSX1204 BRI Version AUI LAN AccessCabling Information Pin Signal Function Transmit + Receive + No Connect Basic Rate Interface WAN Access Ring Indicator Pin Signal Function Carrier DetectReceive Data Transmit Data System Modules CSX1200-E11-MOD System Modules CSX1200-U4-MOD Software Overview Configuration FilesOverview System Software Operational Files User Level Security Files Accessing the CyberSWITCH System Installation Workgroup Remote Access Switch Ordering NI-1 Lines Using EZ-ISDN Codes Ordering Isdn Service US onlyOrdering NI-1 Lines Using NI-1 Isdn Ordering Codes Ordering BRI Isdn Lines Using Provisioning Settings NI-1 AT&T Custom Point-to-Point Provisioning Settings for AT&T 5ESS Switches Unrestricted AT&T 5ESS NI-1 ServiceCSV limit CSV NB limit CSD limit CSD NB limit CSD limit CSV limitAny Provision Settings for Northern Telecom DMS-100 Switches Basic Information for Ordering PRI Isdn Lines Number of call AppearancesVersion Functional Yes Disabled Type of SwitchOption Local Bell Operating Company Sprint PRE-INSTALLATION Requirements Hardware InstallationChoose a suitable setup location Verify administration console requirements Installing the CSX1200-E11-MOD Installing the CSX1200-U4-MOD Cabling Making Connections Accessing the CyberswitchDirect Connection NULL-MODEM Connection to a PC Changing the Baud Rate Remote Connection Using a Modem Remote Connection Using Telnet Powering on Establishing AN Administration Session Admin Accessing the Release Notes CD File Structure Upgrading System SoftwareUpgrading Software Product Country or Directories Switchtype Upgrading Software Local Software Upgrade This message is displayed Remote Software Upgrade Flash recover Console Messages during SSB Upgrade Change Defaults to Secure System Return Configuration to Factory Defaults Configuring Basic Bridging Basic Configuration Executing Cfgedit Configuration Tools Executing Dynamic Management Dynamic ManagementSaving Cfgedit Changes Saving Dynamic Management Changes Utility Dynamic Management Commands Using the Network Worksheets Default Configuration Using the Configuration Chapters Resources Configuring Resources and LinesConfiguring Resources Using Cfgedit United States Resource Background Information Resource Configuration Elements PPP Lines Configuring Lines Using Cfgedit CommonChannel Characteristic PRI/T1 lines E1 lineMultiframe CRC Auto TEI Line Configuration Elements DMS100 custom NI-1 Switch Type Number of Data Number of SPIDsDirectory Numbers Service Profile ID Spid Robbed Bit Signaling is not supported for the CyberSWITCH Line Background Information Commport Information Subaddress Configuration Elements Configuring a Subaddress Using CfgeditSubaddresses Subaddresses Background Information ENABLING/DISABLING Bridging Using Cfgedit Configuring Basic BridgingSelect Enable/Disable Bridging MAC Layer Bridging Configuration Elements MAC Layer Bridging Background Information Internet Protocol IP Option Configuring Basic IP RoutingEnabling IP Using Cfgedit IP Option Configuration Elements IP Operating ModeConfiguring the IP Operating Mode Using Cfgedit IP Background Information IP Operating Mode Background Information IP Operating Mode Configuration Elements IP Network Interfaces Configuring Interfaces Using Cfgedit USER’S Guide Network Interface Configuration Elements MTU Transmit Broadcast IP Address Default switch for numbered WAN interfaces IP RIP Receive Control IP Network Interface Background Information IP Host RFC1294 IP Network Interface Type Associated Remote DeviceWAN Direct Host IP Host RFC1294 Hdlc Bridge USER’S Guide Example 1 LAN, WAN and WAN Direct Host Interfaces Example 2 LAN, WAN UnNumbered, WAN Remote LAN Interfaces IP RIP and the IP Network Interfaces Isdn Isdn IP RIP Over Dedicated Connections SITE3 Proxy ARP Redundant Configurations for BackupNetwork Flattening Example IP Host Communications in Flattened Networks Secondary IP Addressing Static Routes Configuring Static Routes IP address for the destination network or host Static Route Configuration Elements Workgroup Remote Access Switch Static Route Background Information Isdn Default Route Configuration Elements Default RoutesConfiguring Default Routes Routing Information Protocol RIP Option ENABLING/DISABLING IP RIP Using Cfgedit IP RIP Status IP RIP Configuration ElementsIP RIP Background Information LAN Security Configuring Security Level Security Level Security Overview Device Level Databases System Options and Information OFF-NODE Server Information Network Login InformationUser Level Databases Configuring Security Level On-Node Yes Database Device Level User Level Administration Security No Security Configuring no Security Using Cfgedit Device Level Security Background Information Configuring Device Level Security Using CfgeditDevice Level Security User Level Security Background Information Configuring User Level Security Using CfgeditUser Level Security User Level Security Isdn Making a Telnet Connection Responding to Login Prompts Device and User Level Security Configuring Device and User Level Security Using CfgeditTacacs ACE Device and User Level Background Information System Options Configuring System Options and InformationConfiguring System Options Using Cfgedit System Options System Options Configuration Elements PAP Chap Bridge MAC Calling Line Id Authentication Address PAP Chap System Options Background Information System Information Configuration Elements Configuring System Information Using CfgeditSystem Information Optional Calling Line Id System Information Background Information Administrative SessionConfiguring Administrative Sessions Using Cfgedit Administrative Session Configuration Elements Administrative Session Background Information Emergency Telnet Server Port Number Background Information ON-NODE Device Database Configuring Device Level DatabasesConfiguring AN ON-NODE Device Database ON-NODE Device Entries Configuring ON-NODE Device Entries On-node Device Entries No pvc configured for Device DAN SVC 0.0 Routing Device ON-NODE Device Database Configuration Elements DIAL-OUT Phone Numbers Chap Secret Outbound Authentication RIP/SAP Appletalk Information Configuration Elements Bridge Information Configuration Elements Bridging with Hdlc Bridge Devices ON-NODE Device Database Background Information Line Id Security Mode On-node Device Table Configuration DataIP Routing with Hdlc Bridge Devices PAP or Chap IP Routing with PPP IP Devices Using IpcpIP Routing with IP Host Devices RFC1294 IP Routing with PPP Bridge Devices Using BCP Bridging with PPP Bridge Devices Using BCPPAP Password or OFF-NODE Device Database Location Configuring OFF-NODE Device Database Location Using Cfgedit OFF-NODE Device Database Location Background Information OFF-NODE Device Database Location Configuration Elements Configuring Authentication Database Location Using Cfgedit Configuring User Level DatabasesUser Level Authentication Database Location User Level Authentication Database Location Multiple Administration Login Names Configuring OFF-NODE Server InformationName John Doe Name mynode1 Address Remote Office1 Type communications server Configuring VRA Manager Authentication Server VRA Manager Authentication Server VRA Manager Authentication Server Configuration Elements Radius Authentication ServerVRA Manager Authentication Server Background Information Configuring a Radius Authentication Server Displays the current Radius server configuration data Radius Authentication Server Background Information Radius Authentication Server Configuration Elements Configuring a Tacacs Authentication Server Tacacs Authentication Server Tacacs Authentication Server Background Information Tacacs Authentication Server Configuration Elements Configuring AN ACE Authentication Server ACE Authentication Server ACE Authentication Server Configuration Elements ACE Authentication Server Background Information Configuring General Network Login Information Using Cfgedit Configuring Network Login InformationNetwork Login General Configuration Network Login General Configuration Background Information Network Login Banners Background Information Network Login BannersConfiguring Network Login Banners Using Cfgedit Configuring Radius Server Login Information Using Cfgedit Login Configuration Specific to Radius Server Configuring Tacacs Server Login Information Using Cfgedit Login Configuration Specific to Tacacs Server Login Configuration Specific to Tacacs Server Login Elements Specific to Tacacs Configuring Alternate Accesses Advanced Configuration Dedicated Accesses Configuring Alternate AccessesConfiguring a Dedicated Access Using Cfgedit Dedicated Access Configuration Elements Dedicated Access Background Information Configuring AN X.25 Access Accesses Accesses USER’S Guide Configuration Elements Lapb Configuration Elements Timers Maximum Window Size Nonstandard Default Transmit Window Size PVC Configuration Elements Access Background Information B1 B2 Configuring a Frame Relay Access Frame Relay Accesses Configuring a PVC Frame Relay General Configuration Elements LMI Frame Relay PVC Configuration ElementsLMI Format Dlci Value PVC Name Frame Relay Access Background Information Local Management Interface Overview Allowed Not Allowed Bridge Dial OUT Configuring Advanced Bridging Under ISDN, select Dial Out Phone Number Spanning Tree Protocol Bridge Mode of Operation Bridge Mode of Operation Background Information Bridge Filters Configuring Bridge Filters Using Cfgedit Source MAC Filter Commands Protocol Definition CommandsDestination MAC Filter Commands Protocol Filter Commands Lsap in HEX Packet Data Filter CommandsBridge Filter Configuration Elements Filter Destination MAC Bridge Filters Background InformationFilter Type Maximum Number of Each Protocol Definitions Source Discard Connect Destination Protocol Packet Unrestricted Mode Bridge Filters USER’S Guide Packet matching this filter will not be forwarded Filter Action Distribution Result ListOn any LAN port. The packet will be sent to remote Sites connected over the WAN according to Restricted Mode Forwarding Action Restricted Mode Bridge Filters Workgroup Remote Access Switch Packet matching this filter will only be forward Filter Distribution Result Action ListEd on the LAN ports. The packet will not be sent to Any remote sites connected over the WAN Preliminaries Configuring a Destination MAC Address Filter Discard Connect Known Connect List Configuring the Known Connect List Known Connect List Background Information Known Connect List Configuration Elements Static ARP Table Entries Configuring Advanced IP Routing Static ARP Table Entries Configuration Elements Configuring Static ARP Table Entries Using CfgeditStatic ARP Table Entries Select Static ARP Table Entries from the IP menu Static Route Lookup VIA Radius Isolated Mode Configuring AN IP Address Pool Using Cfgedit Static Route VIA Radius Configuration ElementsIP Address Pool Configuration Elements IP Address Pool IP Address Pool Background Information Initiating the IP Filter Configuration Using CfgeditIP Filters Configuring Packet Types Using Cfgedit TCP UDP Icpm Mask Specify a control value any, established, or not established Select Icmp Type Select Add a Forwarding Filter Configuring Forwarding Filters Configuring Connection Filters Configuring Exception Filter Select IP Interfaces Applying FiltersSelect Apply Global Forwarding Filter Select Device Level Databases Select On-node Device Entries IP Filters Configuration Elements NEQ TCP and UDP PortsRange IP Filters Background Information Forwarding Filters Packet Types Exception Filters Connection Filters Application to Network Interfaces Limitations Common Portion FTP WWW Sfvra Example of AN IP Filter Configuration Forward Dhcp Relay Agent Configuring a Dhcp Relay Agent Using Cfgedit Dhcp Background Information Dhcp Configuration Elements Router to Bridge Environment Bridge to Bridge Environment IP Router to IP Router with Relay Agents on both USER’S Guide Remote Bridge to IP Router w/Relay Agent = WAN Rlan Select Dhcp Proxy Client Configuring the Dhcp Proxy ClientDhcp Proxy Client Dhcp Proxy Client ENABLE/DISABLE Flag Sample Configuration IP Router with Dhcp Proxy Client Configuration for IP Router Chloe Configuring IPX Configuring IPX Information IPX Routing Option ENABLING/DISABLING IPX Using CfgeditIPX Option Configuration Element IPX Internal Network Number Configuration Element Configuring the IPX Internal Network Number Using CfgeditIPX Internal Network Number IPX Option Background Information IPX Network Interfaces Configuring IPX Network Interfaces Using CfgeditIPX Network Number Background Information LAN WAN Displays the current IPX network interface data IPX Network Interface Configuration Elements SAP IPX Network Interface Configuration Elements IPX Network Interface Background Information IPX Routing Protocols Configuring IPX Routing Protocols Using CfgeditIPX Routing Protocol Configuration Elements SAP IPX Routing Protocol Background Information Special Considerations Remote LAN Interface IPX Static Routes Configuring IPX Static Routes Using Cfgedit IPX Static Routes Background Information IPX Static Routes Configuration Elements Configuring IPX Netware Static Services Using Cfgedit IPX Netware Static Services IPX Netware Static Services Configuration Elements IPX Spoofing IPX Netware Static Services Background InformationConfiguring IPX Spoofing Using Cfgedit IPX Spoofing Background Information IPX Spoofing Configuration Elements Watchdog Protocol IPX Type 20 Packet Handling Configuring IPX Type 20 Packet Handling Using Cfgedit IPX Type 20 Packet Handling Configuration Elements IPX Isolated ModeConfiguring IPX Isolated Mode Using Cfgedit IPX Isolated Mode Configuration Elements Displaying WAN Peer List IPX Isolated Mode Background Information Configuring Triggered RIP/SAP Global Timers Using Cfgedit Triggered RIP/SAP Background Information Configuring IPX DevicesIPX-SPECIFIC Information for Devices IPX-Specific Information for Devices SPX Watchdog Spoofing Menu Enable Bridging and disable Make calls for bridge data IPX Configuration Elements for Devices IPX Background Information for Devices Configuring Snmp Configuring Snmp Configuring Snmp Snmp Configuration Elements Snmp Background Information WAN Workgroup Remote Access Switch USER’S Guide Appletalk Routing Option Configuring Appletalk RoutingEnabling Appletalk Routing Using Cfgedit Configuring Appletalk Ports Using Cfgedit Appletalk Routing Option Configuration ElementAppletalk Ports Appletalk Routing Background Information Appletalk Ports Configuration Elements Appletalk Ports Background Information Overview Configuring Appletalk Static Routes Using Cfgedit ConfigurationAppletalk Static Routes Considerations Configuring Appletalk Capacities Using Cfgedit Appletalk Routing Static Routes Configuration ElementsAppletalk Capacities Configuration Elements Appletalk Capacities Configuring the Appletalk Isolated Mode Using Cfgedit Appletalk Isolated ModeAppletalk Isolated Mode Configuration Elements Appletalk Capacities Background Information Throughput Monitor Configuring Call ControlConfiguring the Throughput Monitor Using Cfgedit Throughput Monitor Configuration Elements 90% Throughput Monitor Background InformationCondition Trigger Number Window Size Utilization Overload Condition Monitoring Idle Condition Monitoring Call Interval Configuration Elements Configuring the Call Interval Parameters Using CfgeditCall Interval Parameters Call Interval Background Information Monthly Call Charge Configuration Elements Configuring Monthly Call Charge Using CfgeditMonthly Call Charge Monthly Call Charge Background Information Call Restrictions Configuring Call Restrictions Using CfgeditCall Restriction Configuration Elements Call Restrictions Call Restrictions Background Information Bandwidth Reservation Configuring Bandwidth Reservation = CentralSite Select Bandwidth Reservation Bandwidth Reservation Configuration Elements Bandwidth Reservation Background Information Configuring Semipermanent Connections Using CfgeditSemipermanent Connections Semiperm Semipermanent Connections Background Information Semipermanent Connections Configuration ElementsCall Device Commands Throughput Monitor Call Restrictions VRA Manager AS a Call Control Manager Configuring VRA Manager for Call Control Using Cfgedit Background Information LIMITATIONS/CONSIDERATIONS Configuring PPP Configuring Other Advanced OptionsPPP Configuration PPP Configuration Elements PPP Background Information PPP Reference Documents Configuring Default Line Protocol Using Cfgedit Default Line ProtocolDefault Line Protocol Configuration Elements Default Line Protocol Background Information LOG Options Configuration Elements Configuring LOG Options Using CfgeditLOG Options UDP Port LOG Options Background Information CDR LOG Report Overview Call Detail Recording Events Event Report Contents Connect Event Report Contents System Up Event Report Contents Disconnect Event Report ContentsReject Event Report Contents Configuring Compression Options Using Cfgedit Verify Event Report ContentsCompression Options Configuration Elements Compression Options Compression Options Background Information Compression and CCP Tftp Configuring Tftp Tftp Background Information Tftp Configuration Elements File Attributes Configuration Elements Configuring File AttributesFile Attributes File Attributes Background Information File category File types included in the category Users Report Files StatFiles CfgFiles Other FilesRPRTLOG.1 STATLOG.1 System Verification Troubleshooting Verifying Hardware Resources are Operational System Verification Verifying LAN Connection is Operational Verifying WAN Lines are Available for USE Verifying IP Router is Initialized Verifying Bridge is Initialized Verifying a Frame Relay Connection Verifying a Dedicated Connection Verifying MULTI-LEVEL Security Verifying AN X.25 ConnectionVerifying Remote Device Connectivity Ping 100.0.0.2 return Verifying IP Host is Initialized Verifying IP Host Mode is OperationalVerifying IP Host Mode is Operational Verifying IP Routing Over a LAN Interface Verifying IP Routing Over Interfaces Verifying IP Routing Over a WAN Interface 100.0.0.1 100.0.0.0 Host B 192.100.1.3 Host a 100.0.0.2 Verifying IP Routing Over a WAN Direct Host Interface Verifying IP Routing Over a WAN Remote LAN Interface Verifying IP Routing Over a WAN Unnumbered Interface Verifying IP RIP Verifying IP FiltersIp filter trace discard return Verifying IP RIP is Initialized Verifying IP RIP Output Processing on a LAN Interface Verifying IP RIP Output Processing on a WAN Interface Verifying IP RIP Input Processing on a LAN Interface CSX1200 Router Dedicated Connection 100.1.1.1 192.1.1.1 Verifying IPX Routing is Operational Verifying IPX Router is Initialized Xxxx Verifying IPX Routing Over a LAN ConnectionVerifying AN IPX Remote LAN Connection Verifying IPX Routing Over a WAN Connection Verifying the Appletalk Routing FeatureVerifying Triggered RIP/SAP Verifying Appletalk Routing is Initialized Verifying Appletalk Routing is Operational Verifying Appletalk Routing Operation Over a WAN Connection Verifying Snmp is Operational Verifying Call Detail Recording Verifying the Dial OUT Feature Verifying PPP Link Failure Detection is Operational Verifying Compression is OperationalVerifying Reserved Bandwidth is Operational Verifying Dhcp Relay Agent Initialization Verifying Dhcp Relay Agent Verifying the Relay Agent is Operational Verifying the Relay Agent is Enabled Verifying Dhcp Proxy Client Initialization Verifying Dhcp Proxy Client UDP Ports Verifying the Proxy Client is EnabledVerifying the Proxy Client is Operational Verifying Proxy ARP is Operational Verifying a Semipermanent Connection Verifying Proxy ARP is Operational General Procedures Problem DiagnosisProblem LAN Adapter WAN Line Availability Bridge InitializationIP Routing Initialization Out Svc 1 slot #, port # Frame Relay Connections Dedicated Connections Connections Set-up Remote Device Connectivity LAN Attachment DisabledMULTI-LEVEL Security IP Host Initialization IP Host ModeIP Host Mode Operation Over the LAN Connection IP Routing Over the LAN Interface Connection IP Host Mode Operation Over the WAN ConnectionIP Routing Over Interface Connections IP Routing Over a WAN Interface Connection IP Routing Over a WAN Direct Host Interface Connection IP Routing Over a WAN Rlan Interface Connection IP Routing Over a WAN Unnumbered Interface Connection IP RIP Initialization If you are still experiencing problems IP RIP Input Processing on a LAN Interface IP RIP Output Processing on a LAN Interface IP RIP Input Processing on a WAN Interface IP RIP Output Processing on a WAN Interface IPX Routing Over the LAN Connection IPX RoutingIPX Routing Initialization IPX Routing Over the Remote LAN Connection IPX Routing Over the WAN Connection IPX Routing and Service Tables Triggered RIP/SAP Operation Appletalk RoutingTriggered RIP/SAP Start UP Appletalk Routing Operational Over the LAN Connection Appletalk Routing Initialization USER’S Guide Appletalk Routing Operational Over the WAN Connection Snmp CyberSWITCH does not generate Snmp Trap PDUs Dial OUT Set Up Call Detail Recording Peer Protocol-Rejects CCP CompressionSuccessful Negotiation Enabling the Relay Agent CyberSWITCH does not have Compression EnabledRelay Agent Initialization Proxy Client Initialization Relay Agent Operation Proxy Client Operation Enabling the Proxy Client Proxy ARP Operation Proxy ARP Operation Local Area Network LED Indicators LED Indicators PRI LED Indicators Lanview Leds CSX1200-E11-MOD OFF Receive LEDs Service Indicator Remains LIT Service Indicator OUT SVC LAN Xmit Error Service Indicator Blinks Alarm Leds PRI only Alarm LEDs PRI Only Informational Messages System Messages Initialization Messages Boot MessagesNormal Operation Messages Status Messages Spanning Tree Messages Error MessagesSystem Message Summary Port LAN Adapter, operating in local and remote mode Port LAN Adapter, operating in remote mode onlyCall has exceeded the configured maximum duration Adapter #’x’ failed to respond from bootstrap Attempt to initialize unconfigured DM card in slot slot # Attempting to load FileName for UpgradeAuth ACE Could not create service file Auth ACE Could not write service file Auth ACE Error receiving server log message acknowledgment Auth ACE Encryption configured for DES not supportedAuth ACE Login rejected user user name Auth ACE Node verification received Client initialized Auth Radius IP Host rejected IP Host id IP host Id Auth Radius Login rejected device device nameAuth Radius IP Resolve rejected IP Address IP address Auth Radius PAP rejected device device name Auth Warning code 0001 Timeout Auth Tacacs Login rejected user user nameAuth Warning code 0004 No authentication node available Auth Warning code 0007 Authentication mode mismatch Bootstrap came alive on DM card in slot slot # Booting System SoftwareBootstrap came alive on WAN card in slot slot # Bad auth result in smgrauthaanotify for device device name Call Restrictions have been enabled by user command Call Restrictions have been disabled by user commandCalculating CRC’s Calling Line ID Failure, Duplicate ID calling line Id Call Restriction statistics reset for new month Call Restriction statistics reset for new dayCall Restrictions will allow calls to be made this hour Call Restrictions will allow calls to be made Workgroup Remote Access Switch Cause Code Event Cause cause code received for Dlci dlci indexCCP Internal Decompression Failure CCP Option Negotiation Failure, Non-Convergence detected Channel in use in Hostcallrequest Chap Authentication Failure remote device not responding Couldn’t find speech service slot #, port # Configured adapter # ’x’ type does not existCurrent monthly charges reset for new month CNTR-TMRTimed out waiting for TMR number interrupt DHCP-P Failed to close UDP port x, erc = y Dedicated connection down slot #, port #DHCP-P Failed to open UDP port for first Dhcp client DHCP-P Failed to open UDP port x, erc = y DHCP-P Proxy Client enabled DHCP-P Proxy Client disabledDHCP-R Relay Agent disabled DHCP-P Proxy Client initialization failed DHCP-R Relay Agent initialization failed DHCP-R Relay Agent enabledDHCP-R UDP port 67 closed DHCP-R UDP port 67 opened DM card type configured in slot slot # does not exist DM card in slot slot # signals it is operationalDM card in slot slot # will not come out of reset DM upgrade started. Board=board #, Modem=modem # Downloading Bootstrap to DM card in slot slot # DM upgrade success. Board=board #, Modem=modem #Edrv transmit error error code DSL test failed to establish Layer 1, port=port # Error downloading bootstrap program to adapter #’x’ Error closing file ’s’Error downloading operational software to adapter ’x’ Error during channel initialization Access access index Error parsing old WAN Direct Host interface bad format Error mapping WAN adapter #’x’ into Host memory mapError opening file \system\ethernt2.bin Error programming adapter #’x’ hardware Error requesting slot activation Error reading sdconf.rec fileError sending message to Call Control Facility not subscribed Slot=slot # Port=port # Failure during read of file ’s’ Failed to obtain Terminal info in smgrprocterminalauthsessFailure during Static RAM test on adapter # ’x’ Failure to allocate enough memory for Xilinx load file USER’S Guide Formatting Flash Memory File Access ErrFrietf detected PPP protocol from NAME, shutting down PVC Frame Relay event queue full Interrupt fault on WAN Adapter in Slot slot # Installing File Set into Flash MemoryFrUtl No registered device for Dlci dlci index Initial TDM Clock Master slot#, line# Invalid Password password given Invalid Cllm received on Access access indexIP Error from ESP datagram discarded IP x.x.x.x not added to the pool Unknown error y IP Invalid configuration for Network Interface dd IP Default Route not added, invalid next hop IP address #Ipap ResMem returned invalid device maximum value IP Cannot get system memory for IP IP host is initialized successfully IP Invalid Peer IP Address IP address, WAN IP Stream ClosedIP IP router is initialized successfully IP Network initialized successfully on ddd.ddd.ddd.ddd Ipcp Option Negotiation Failure, Non-Convergence detected Ipcp IP Address Pool Out of IP addressesIpcp Remote device does not negotiate IP address IP Host Call Dropped XID was not received from remote IP RIP All network interfaces used IP Host Security Rejection Invalid Security ID Id stringIP RIP Buffers allocated IP RIP Initialization failed, unable to allocate buffers IP RIP Unable to register WAN Connection notification IP RIP Unable to open RIP/UDP portIPX Invalid Ipxwc passed IPX Network initialized successfully on IPX SAP Unable to add service, service table full IPX SAP Space available in service tableIpxwan IPX Internal Network Number must be configured IPX RIP Shutdown complete LAN Adapter configuration conflict LAN Adapter Command TimeoutLAN Adapter Fatal Error Reported LAN Adapter HW upgrade may be required LAN Adapter Response Timeout LAN Adapter ResetLAN Adapter System resource error LAN Init Error LMI alarm on Access access index LAN Xmit ErrorLMI alarm reset Access access index LAN Port port # detected shorted LAN media Memory Access Timeout Manage Mode updates have been successfully committedManual intervention required please replace LAN card Manual restart initiated on DM board in slot slot # Modem modem # of DM card in slot slot # is unusable Mismatch of configured and installed DM card in slot slot #Modem revision on modem modem # of slot slot # failed Negotiation Failure with Semipermanent device Network sent Status with state = 0, tear down call Network sent Cause Spid not supported slot #, port #No Active Calls Active Sites No Active List entry available in INM Not enough memory for Security module Out of LAN Adapter transmit command descriptorsOffnode server lookup of Dial Out User failed Outgoing calls barred Slot=slot # Port=port # PAP Identification timeout on remote device Auto For over 5 minutes Report problem to Phone companyPAP Invalid password for name given by remote device Out Svc # slot # , port # PAP Unknown name name given by remote device PAP Remote device rejected System Information error messagePost number, Hdlc #number External Loopback Test Failed Post number, Hdlc #number Internal Loopback Test Failed RBSoutSMchannel # Timeout waiting for Wink RBS LIFAddTimer failurePVC for Dlci dlci index not Active PVC not allocated for dlci index Rebooting Reattempting to Install File Set into Flash MemoryReplace Lithium Battery Contact your Representative Reserved signal Retrying download of DM card in slot slot# in x seconds Security Rejection Invalid Password password givenRx Channel Inactivity Detected Security Rejection Caller did not negotiate security Security Rejection Timeout on Startup Complete Security Rejection No Password given by callerSemipermanent. Device x disconnected by admin Security Rejection No Protocol List supplied Signal for unknown CallCmd task task Id Semipermanent. Device x reconnected by adminSlot #, port # Cfg Error Snmp Authentication failure, unknown community name SSB Can’t read RTC prior to i960 POSTs SSB Post 27 i960timer82c54FAILURESSB Couldn’t read RTC during i960 POSTs SSB i960 Post number not equal to i386’s SSB Post 29 i960lan82503 Failure SSB Post 28 i960lan82596sx FailureSSB Post 30 i960permodmem1 Failure SSB Post 31 i960permodmem2 Failure Switch could not recognize phone number nnnnnnn Successfully Loaded Release X.Y Issue ZSystem Clock Fault on Wan Adapter in Slot slot # STP a Blan Topology Change has been detected Tftp Local error #3 Server not initialized Tftp Local error #2 Feature not initializedTftp Local error #4 UDP rejected packet filename Tftp Local error #5 UDP open failed Tftp Local error #14 Bad file name Tftp Local error #13 Received unexpected opcode filenameTftp Local error #15 Bad mode string Tftp Local error #18 Unable to open file filename Tftp Remote error # 1 Text from Remote Host Tftp Remote error # 0 Text from Remote HostTftp Remote error # 2 Text from Remote Host Tftp Remote error # 3 Text from Remote Host Timeout detected on connection establishment Compression subsystem is not enabledTimeout detected on receiving caller’s number Timeout on Startup Complete Unable to get Digital Modem resource to place call Type mismatch of configured & installed adapter # ’x’Unable to Decrypt Datagram Unable to open Modem Upgrade file Unable to open \config\devdb.nei fileUnable to restore original ISRs for Interrupt interrupt # Unable to Identify a remote device Unmatched Login Task Unexpected error during transmission of LMI frameUpdating CyberSWITCH from FileName WAN card in slot slot # signals it is operational Watchdog timeout detected on WAN board ’x’ Watchdog timeout detected on DM board in slot slot #X25 facilities error, facilities not allowed in PVC X25 facilities error, bad facility length X25 facilities error, fast select not available X25 facilities error, reverse charging not acceptedX25 facilities error, fast select not accepted X25 facilities error, throughput negotiation not allowed Zone allocation failed, increase zone table capacity Zone allocation failed, maximum capacity already configuredX25 facilities warning, NUI not available Trace Messages Location Causes Call Trace Messages Call Trace Message Summary -BRD CFG ACK Slot=slot # Configure ack slot #Inband treatment has been applied Init data link slot #, port #, ces Interworking unspecified cause Out configure port #Off-hook warning tone on Origination call address is non-ISDN Out init data link slot #, port # , ces Received unknown signal valueRecall dial tone on Received unknown progress value IP Filters Trace Messages PPP Packet Trace Messages Configure ACK Configure RequestConfigure NAK Configure Reject Echo Reply Trace MessagesDiscard Request Trace Message Summary X25 DCE RR LCN logical channel number, number of bytes bytes X25 Data LCN logical channel number, number of bytes bytes System is sending a call request to the network Lapb Trace Message Summary Lapb Trace Messages Lapb UA Lapb SabmeOut Lapb Disc Out Lapb DM Remote Management System Maintenance Remote Management SITE.2 Installation and Configuration Usage Instructions Telnet Earlier Releases Usage Instructions Tftp Client PC Users Report Files Statistics Files Config files Other Files Remote Installation with USER2 USER’S Guide Accessing Administration Services System Commands Boot Device Commands Setting the IP Address Viewing Operational Information Accessing Dynamic Management List relnote.txt Viewing Operational Information Status Second column is the potential number of connections 100 Viewing Throughput Information Saving Operational Information Throughput Monitor Contents Clearing Operational Information CONFIGURATION-RELATED Commands File Utility Commands Restarting the CyberswitchSetting the Date and Time Login-Id Terminating Administration Sessions Appletalk Routing Commands State Type Network range Default zoneFlags LAN port Zones valid Distance Zone Bridge Commands Call Control Commands Device name must be re-entered Calling phone number at data rate, device PPP Call Restriction Commands Call Detail Recording Commands Frame Relay Commands Compression Information CommandsDhcp Commands Clears all statistics associated with the fr stat command IP Routing Commands Disables the trace Valid Icmp Echo Reply was received from host ddd.ddd.ddd.ddd Mask used for the destination Age of the route in seconds IPX Routing Commands Ipx ping host ipx address Isdn usage Isdn Usage Commands Packet Capture Commands LAN CommandsLOG Commands All packets will be captured Following is an example pkt display screen Banyan Vines Packet Detail Screen Bridged Packet Radius Commands Radius ipres Telnet Commands Snmp CommandsTCP Commands Used to close the current Telnet connection to a target host Possible send parameters are defined as follows Terminal Commands Tftp GET Tftp Commands Tftp Session Trace Commands User Level Security Commands UDP Commands Commands WAN Commands Clears the statistics for the default VC Call Restriction Statistics System StatisticsConnectivity Statistics Throughput Monitoring Statistics Call Statistics Appletalk Protocol Statistics Appletalk Statistics Number of AppleTalk Echo requests received Count of AppleTalk Echo replies received Number of NBP LookUp Requests received Appletalk Port Statistics Call Detail Recording Statistics Bridge Statistics Decompression Related Statistics Compression StatisticsCompression Related Statistics Common Dhcp Statistics Dhcp StatisticsDhcp Relay Agent statistics and Dhcp Proxy Agent statistics Dhcp Relay Agent Statistics Dhcp Proxy Client Statistics Frame Relay Statistics Access Related Statistics Not currently supported PVC Related Statistics LAN Statistics IP Group Statistics IP Statistics Icmp Group Statistics Number of Icmp Destination Unreachable messages received IPX General Statistics IPX Statistics Number of IPX packets received with incorrect checksums IPX RIP Statistics IPX Route Statistics IPX Triggered RIP Statistics IPX Triggered SAP Statistics IPX Service Statistics RIP Interface Statistics RIP StatisticsRIP Global Statistics Snmp Statistics SnmpInReadOnlys TCP Statistics Statistics for Server or Remote Initiated Tftp Activity Tftp Statistics Statistics for ALL Tftp Activity Statistics for Local or Client Initiated Tftp Activity UDP Statistics WAN Frietf Statistics Layer 1 General Statistics Layer 1 PRI Error Statistics WAN Statistics Statistics Virtual Circuit VC Related Statistics Local DTE X.121 address INSTALLING/UPGRADING System Software Routine MaintenanceExecuting Configuration Changes Making Changes Using Cfgedit Obtaining System Custom Information Configuration Backup and RestoreMaking Changes Using Manage Mode System Worksheets Appendices System Worksheets Network Topology Lines System DetailsResources Accesses Device Information Authentication Information Frame Relay Information IP Routing Bridging and Routing Information IPX Routing AppleTalk Routing/Port Information Appletalk Routing IPX Main MenuSnmp PPP FR DBU DES, Feal Physical Resources MenuHdlc PPP FR DBU BPS Dhcp Options MenuWAN Rlan Snmp FR DBU Radius Tacacs ACE Security MenuIsdn SVC, PVC PPP STAC-L25 VRA Manager TCP port Contacting Cabletron Systems Reporting ProblemsGetting Assistance Number of Pages Including this To Customer Service FromPhone FAX Cabletron Systems System Problem Report Command Use Administrative Console Commands TableDisplays help screen Displays or clears current AppleTalk port statistics Verifies call detail recording servers are configured Command Use Cdr stats clearClears administration screen Clears current call detail recording statistics Dlci Local log file only displays the call detail recording log Generates a triggered RIP/SAP update request toLog cdr erase Local log file only erases the call detail recording log Displays system errors and system messages Changes password for current access level Revision information Displays the current Tftp statisticsDisplays current software version and hardware resource Specified X.25 access Access or the specified access Manage Mode Commands Table Address pool Ipxspoof Allows you to configure system level spoofing dataAdds/changes/deletes an IPX address from the IPX Manage Mode Commands Table USER’S Guide Cause Codes Table USER’S Guide Cause Codes Table USER’S Guide Workgroup Remote Access Switch USER’S Guide Unknown Dec Value Hex Value Cause Br stat IndexCDR Cdr 534 cfg Del 524 destfilt Cmp 535 commandsDate Device add Device 162 Ipcp Ip addrpool 535, 537 IP filters 241 Lan 545 LAN adapter IsdnLan test 355 Lanview LEDs 420 Lapb Led status 518 line STAC-LZS NTT INS Sentry Restart 523 restoreSpid Srcfilt Udp Term 554 term set 357 terminal mode X25 Wr 52, 521 ws 52