Cabletron Systems CSX1000, CSX1200 manual = WAN Rlan

USER’S GUIDE

Configuration for IP Router "Alex"	Configuration for Remote Bridge "Ruby"
System Information:	System Information:
System Name = Alex	System Name = Ruby
System Password = stone	System Password = rubble
Security Level = Device Level (On-node	Security Level = Device Level (On-node
Device Database, PAP security)	Device Database, PAP security)
Bridging disabled	Bridging enabled
	Bridge Packet Data Filter: offset=1;
	mask=00;value=00;action=CONNECT;
	dist list=“Alex”
IP enabled (router mode)	IP disabled
I/F = LAN (192.168.1.168)
I/F = WAN RLAN
(204.157.42.190)
DHCP enabled	DHCP disabled
Relay Destination #1 = 192.168.1.5
(interface = “N/A”)
Hop Count Threshold = 4
Device = “Ruby”	Device = “Alex”
ISDN Line Protocol = PPP	ISDN Line Protocol = PPP
Dial Out Phone # = 5311	Dial Out Phone # = 5411
PAP Password = “rubble”	PAP Password = “stone”
IP Address = 204.157.42.0	IP Address = (none)
IP Routing = disabled	IP Routing = disabled
Bridging = enabled	Bridging = enabled
Make calls for Bridge data = disabled	Make calls for Bridge data = enabled

Notes: The DHCP Server must have a route specified to get back to the DHCP-enabled router Alex, or use Alex as its default gateway.

When you are using a RLAN Interface, you are limited to one subnetwork.

264 CyberSWITCH