Cabletron Systems CSX1000, CSX1200 manual System Information, Optional Calling Line Id

USER’S GUIDE

The following table summarizes the identifying and authenticating information used by each remote device type to connect to the system:

Device Type	Identifier	Authenticator
HDLC Bridge	Bridge Ethernet	Bridge Ethernet Address
(MAC Layer	Address	Optional: Password
Bridge)	or	Optional: Calling Line Id
	Calling Line Id
IP Host	IP Host Id	IP Host Id
(with RFC 1294		Optional: Calling Line Id
encapsulation)
PPP	Device Name	CHAP Secret
		or
		PAP Password
		Optional: Calling Line Id

SYSTEM INFORMATION

CONFIGURING SYSTEM INFORMATION

USING CFGEDIT

1.Select option (2), System Information from the System Options and Information menu. If you need guidance to find this menu, refer to the instructions provided in the System Options configuration section. The following screen will be displayed:

System Information Menu:
1)	System Name		is "ralph"
2)	System	Password	is	"ralph"
3)	System	Secret	is	"ralph"

Select function from above or <RET> for previous menu: 1

2.Select the option you wish to configure and press <RET>. Follow the onscreen instructions to configure the option you select. These values are required only if there are remote devices on the network that require this information for system validation.

SYSTEM INFORMATION CONFIGURATION ELEMENTS

SYSTEM NAME

The System Name is a user-defined name for the CyberSWITCH. This name is preconfigured, but may be changed. It is from 1 to 17 ASCII characters in length. The System Name is only used if there are remote devices on the network that require this information for system validation. This name is passed in the name field during PAP negotiation.

150 CyberSWITCH