Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems CSX1000, CSX1200 manual Login Elements Specific to Tacacs

Models: CSX1000 CSX1200

1 644

Download 644 pages 26.85 Kb

Page 194

USER’S GUIDE

netlogin change

Allows you to change the current network login configuration data. After entering the netlogin change command, you will be prompted for the type of login configuration information you want to change. The prompt will resemble the CFGEDIT screen in which this information was originally configured. You may change: user level security general configuration, login banners, login configuration specific to RADIUS, and login configuration specific to TACACS.

LOGIN CONFIGURATION SPECIFIC TO TACACS SERVER BACKGROUND INFORMATION

LOGIN ELEMENTS SPECIFIC TO TACACS

There are login configuration parameters specific to TACACS. These include the specification of prompt order, a password control character, and specification of messages for TACACS return codes.

The prompt order specified on the system must match the prompt order specified on the TACACS server. The default order is:

First prompt: LOGIN ID PROMPT (fixed)

Second prompt: DYNAMIC PASSWORD PROMPT

Third prompt: USER PASSWORD PROMPT

If you need to change this order, you may specify this order of prompts in the login process.

The password control character is a key sequence you specify to switch between the login mode and the change password mode. In order to enable this feature for the general user, you need to configure this password control character.

TACACS may provide return code messages upon user login. You may customize these messages through CFGEDIT. The default messages are as follows:

If the login process was successful, but the user password is about to expire, one of the following messages is displayed:

•Password about to expire

•Password expiration imminent

If the login process is unsuccessful, one of the following messages is displayed:

•Login invalid

•Please change PIN

•User/Password invalid

194 CyberSWITCH

Image 194

Cabletron Systems CSX1000, CSX1200 manual Login Elements Specific to Tacacs

Contents

USER’S Guide Virus Disclaimer Trademarks DOC Notice Contents Ordering Isdn Service US Only Configuration Tools CfgeditSecurity Overview Configuring System Options and Information Configuring Off-node Server Information Configuring Advanced Bridging Configuring Advanced IP Routing Configuring IPX Configuring Snmp Configuring Other Advanced Options System Verification Problem Diagnosis LED Indicators System Messages System Statistics Routine Maintenance Cfgedit Map Using this Guide Documentation SET Cfgedit MAPUser’s Guide Guide ConventionsCfgedit Screens CyberSWITCH System OverviewCyberswitch Cyberswitch NetworkUnique System Features IsdnCyberswitch Interoperability Protocols Interoperability OverviewRadius Interoperability Devices Security Overview Network Interface OverviewIsdn System ComponentsRemote Isdn Devices Switches Supported Safety Considerations Hardware OverviewSystem Platforms CSX1000 and NE Link 1000 a Network Express ProductCSX1001, shown below, is equivalent to the NE Link 1000 B2 Workgroup Remote Access Switch System Characteristics EMI CSX1200 CSX1204 BRI Version AUI LAN AccessCabling Information Pin Signal Function Transmit + Receive + No Connect WAN Access Basic Rate InterfaceReceive Data Pin Signal Function Carrier DetectRing Indicator Transmit DataCSX1200-E11-MOD System ModulesSystem Modules CSX1200-U4-MOD Overview Configuration FilesSoftware Overview System SoftwareOperational Files User Level Security Files System Installation Accessing the CyberSWITCHWorkgroup Remote Access Switch Ordering NI-1 Lines Using NI-1 Isdn Ordering Codes Ordering Isdn Service US onlyOrdering NI-1 Lines Using EZ-ISDN Codes Ordering BRI Isdn Lines Using Provisioning SettingsProvisioning Settings for AT&T 5ESS Switches NI-1 AT&T Custom Point-to-PointCSV limit CSV NB limit AT&T 5ESS NI-1 ServiceUnrestricted CSD limit CSD NB limitCSD limit CSV limitAny Provision Settings for Northern Telecom DMS-100 Switches Basic Information for Ordering PRI Isdn Lines Number of call AppearancesVersion Functional Yes Option Local Bell Operating Company Type of SwitchDisabled SprintChoose a suitable setup location Hardware InstallationPRE-INSTALLATION Requirements Verify administration console requirementsInstalling the CSX1200-E11-MOD Installing the CSX1200-U4-MOD Cabling Direct Connection Accessing the CyberswitchMaking Connections NULL-MODEM Connection to a PCChanging the Baud Rate Remote Connection Using Telnet Remote Connection Using a ModemEstablishing AN Administration Session Powering onAdmin Accessing the Release Notes CD File Structure Upgrading System SoftwareUpgrading Software Product Country or Directories Switchtype Upgrading Software Local Software Upgrade Remote Software Upgrade This message is displayedFlash recover Console Messages during SSB Upgrade Change Defaults to Secure System Return Configuration to Factory Defaults Basic Configuration Configuring Basic BridgingConfiguration Tools Executing CfgeditExecuting Dynamic Management Dynamic ManagementSaving Cfgedit Changes Utility Dynamic Management Commands Saving Dynamic Management ChangesDefault Configuration Using the Network WorksheetsUsing the Configuration Chapters Resources Configuring Resources and LinesConfiguring Resources Using Cfgedit United States Resource Configuration Elements Resource Background InformationPPP Configuring Lines Using Cfgedit LinesCommonChannel Characteristic PRI/T1 lines E1 lineMultiframe CRC Line Configuration Elements Auto TEIDMS100 custom NI-1 Switch Type Number of Data Number of SPIDsDirectory Numbers Service Profile ID Spid Robbed Bit Signaling is not supported for the CyberSWITCH Commport Information Line Background InformationSubaddresses Configuring a Subaddress Using CfgeditSubaddress Configuration Elements Subaddresses Background InformationSelect Enable/Disable Bridging Configuring Basic BridgingENABLING/DISABLING Bridging Using Cfgedit MAC Layer Bridging Configuration ElementsMAC Layer Bridging Background Information Internet Protocol IP Option Configuring Basic IP RoutingEnabling IP Using Cfgedit Configuring the IP Operating Mode Using Cfgedit IP Operating ModeIP Option Configuration Elements IP Background InformationIP Operating Mode Configuration Elements IP Operating Mode Background InformationConfiguring Interfaces Using Cfgedit IP Network InterfacesUSER’S Guide Network Interface Configuration Elements MTU Transmit Broadcast IP Address Default switch for numbered WAN interfaces IP RIP Receive Control IP Network Interface Background Information WAN Direct Host IP Host RFC1294 IP Network Interface Type Associated Remote DeviceIP Host RFC1294 Hdlc BridgeUSER’S Guide Example 1 LAN, WAN and WAN Direct Host Interfaces Example 2 LAN, WAN UnNumbered, WAN Remote LAN Interfaces IP RIP and the IP Network Interfaces Isdn Isdn IP RIP Over Dedicated Connections SITE3 Proxy ARP Redundant Configurations for BackupNetwork Flattening Secondary IP Addressing Example IP Host Communications in Flattened NetworksConfiguring Static Routes Static RoutesIP address for the destination network or host Static Route Configuration Elements Workgroup Remote Access Switch Isdn Static Route Background InformationDefault Route Configuration Elements Default RoutesConfiguring Default Routes ENABLING/DISABLING IP RIP Using Cfgedit Routing Information Protocol RIP OptionIP RIP Background Information IP RIP Configuration ElementsIP RIP Status LANConfiguring Security Level SecuritySecurity Overview Security LevelSystem Options and Information Device Level DatabasesOFF-NODE Server Information Network Login InformationUser Level Databases Configuring Security Level Database Device Level User Level Administration Security On-Node YesConfiguring no Security Using Cfgedit No SecurityDevice Level Security Background Information Configuring Device Level Security Using CfgeditDevice Level Security User Level Security Background Information Configuring User Level Security Using CfgeditUser Level Security User Level Security Isdn Responding to Login Prompts Making a Telnet ConnectionTacacs Configuring Device and User Level Security Using CfgeditDevice and User Level Security ACEDevice and User Level Background Information System Options Configuring System Options and InformationConfiguring System Options Using Cfgedit System Options Configuration Elements System OptionsBridge MAC Calling Line Id Authentication Address PAP ChapSystem Options Background Information PAP ChapSystem Information Configuring System Information Using CfgeditSystem Information Configuration Elements Optional Calling Line IdSystem Information Background Information Administrative SessionConfiguring Administrative Sessions Using Cfgedit Administrative Session Configuration Elements Administrative Session Background Information Emergency Telnet Server Port Number Background Information ON-NODE Device Database Configuring Device Level DatabasesConfiguring AN ON-NODE Device Database Configuring ON-NODE Device Entries ON-NODE Device EntriesOn-node Device Entries No pvc configured for Device DAN SVC 0.0 Routing Device ON-NODE Device Database Configuration Elements DIAL-OUT Phone Numbers Chap Secret Outbound Authentication RIP/SAP Appletalk Information Configuration Elements Bridge Information Configuration Elements ON-NODE Device Database Background Information Bridging with Hdlc Bridge DevicesLine Id Security Mode On-node Device Table Configuration DataIP Routing with Hdlc Bridge Devices PAP or Chap IP Routing with PPP IP Devices Using IpcpIP Routing with IP Host Devices RFC1294 IP Routing with PPP Bridge Devices Using BCP Bridging with PPP Bridge Devices Using BCPPAP Password or Configuring OFF-NODE Device Database Location Using Cfgedit OFF-NODE Device Database LocationOFF-NODE Device Database Location Configuration Elements OFF-NODE Device Database Location Background InformationConfiguring Authentication Database Location Using Cfgedit Configuring User Level DatabasesUser Level Authentication Database Location User Level Authentication Database Location Name John Doe Name mynode1 Address Remote Office1 Configuring OFF-NODE Server InformationMultiple Administration Login Names Type communications serverVRA Manager Authentication Server Configuring VRA Manager Authentication ServerVRA Manager Authentication Server Background Information Radius Authentication ServerVRA Manager Authentication Server Configuration Elements Configuring a Radius Authentication ServerDisplays the current Radius server configuration data Radius Authentication Server Configuration Elements Radius Authentication Server Background InformationTacacs Authentication Server Configuring a Tacacs Authentication ServerTacacs Authentication Server Configuration Elements Tacacs Authentication Server Background InformationACE Authentication Server Configuring AN ACE Authentication ServerACE Authentication Server Configuration Elements ACE Authentication Server Background Information Configuring General Network Login Information Using Cfgedit Configuring Network Login InformationNetwork Login General Configuration Network Login General Configuration Background Information Network Login Banners Background Information Network Login BannersConfiguring Network Login Banners Using Cfgedit Login Configuration Specific to Radius Server Configuring Radius Server Login Information Using CfgeditLogin Configuration Specific to Tacacs Server Configuring Tacacs Server Login Information Using CfgeditLogin Configuration Specific to Tacacs Server Login Elements Specific to Tacacs Advanced Configuration Configuring Alternate AccessesConfiguring a Dedicated Access Using Cfgedit Configuring Alternate AccessesDedicated Accesses Dedicated Access Configuration ElementsDedicated Access Background Information Accesses Configuring AN X.25 AccessAccesses USER’S Guide Configuration Elements Lapb Configuration Elements Timers Maximum Window Size Nonstandard Default Transmit Window Size PVC Configuration Elements Access Background Information B1 B2 Frame Relay Accesses Configuring a Frame Relay AccessConfiguring a PVC Frame Relay General Configuration Elements LMI Format Frame Relay PVC Configuration ElementsLMI Dlci ValuePVC Name Frame Relay Access Background Information Local Management Interface Overview Allowed Not Allowed Configuring Advanced Bridging Bridge Dial OUTUnder ISDN, select Dial Out Phone Number Bridge Mode of Operation Spanning Tree ProtocolBridge Mode of Operation Background Information Configuring Bridge Filters Using Cfgedit Bridge FiltersDestination MAC Filter Commands Protocol Definition CommandsSource MAC Filter Commands Protocol Filter CommandsLsap in HEX Packet Data Filter CommandsBridge Filter Configuration Elements Filter Destination MAC Bridge Filters Background InformationFilter Type Maximum Number of Each Protocol Definitions Unrestricted Mode Bridge Filters Source Discard Connect Destination Protocol PacketUSER’S Guide On any LAN port. The packet will be sent to remote Filter Action Distribution Result ListPacket matching this filter will not be forwarded Sites connected over the WAN according toRestricted Mode Bridge Filters Restricted Mode Forwarding ActionWorkgroup Remote Access Switch Ed on the LAN ports. The packet will not be sent to Filter Distribution Result Action ListPacket matching this filter will only be forward Any remote sites connected over the WANConfiguring a Destination MAC Address Filter PreliminariesDiscard Connect Configuring the Known Connect List Known Connect ListKnown Connect List Configuration Elements Known Connect List Background InformationConfiguring Advanced IP Routing Static ARP Table EntriesStatic ARP Table Entries Configuring Static ARP Table Entries Using CfgeditStatic ARP Table Entries Configuration Elements Select Static ARP Table Entries from the IP menuIsolated Mode Static Route Lookup VIA RadiusIP Address Pool Configuration Elements Static Route VIA Radius Configuration ElementsConfiguring AN IP Address Pool Using Cfgedit IP Address PoolIP Address Pool Background Information Initiating the IP Filter Configuration Using CfgeditIP Filters Configuring Packet Types Using Cfgedit Mask TCP UDP IcpmSpecify a control value any, established, or not established Select Icmp Type Configuring Forwarding Filters Select Add a Forwarding FilterConfiguring Connection Filters Configuring Exception Filter Select Apply Global Forwarding Filter Applying FiltersSelect IP Interfaces Select Device Level Databases Select On-node Device EntriesIP Filters Configuration Elements Range TCP and UDP PortsNEQ IP Filters Background InformationPacket Types Forwarding FiltersConnection Filters Exception FiltersApplication to Network Interfaces Common Portion LimitationsExample of AN IP Filter Configuration FTP WWW SfvraForward Configuring a Dhcp Relay Agent Using Cfgedit Dhcp Relay AgentDhcp Configuration Elements Dhcp Background InformationBridge to Bridge Environment Router to Bridge EnvironmentIP Router to IP Router with Relay Agents on both USER’S Guide Remote Bridge to IP Router w/Relay Agent = WAN Rlan Select Dhcp Proxy Client Configuring the Dhcp Proxy ClientDhcp Proxy Client Dhcp Proxy Client ENABLE/DISABLE Flag Sample Configuration IP Router with Dhcp Proxy Client Configuration for IP Router Chloe Configuring IPX Configuring IPX Information IPX Routing Option ENABLING/DISABLING IPX Using CfgeditIPX Option Configuration Element IPX Internal Network Number Configuring the IPX Internal Network Number Using CfgeditIPX Internal Network Number Configuration Element IPX Option Background InformationIPX Network Number Background Information Configuring IPX Network Interfaces Using CfgeditIPX Network Interfaces LAN WANDisplays the current IPX network interface data IPX Network Interface Configuration Elements SAP IPX Network Interface Configuration Elements IPX Network Interface Background Information IPX Routing Protocols Configuring IPX Routing Protocols Using CfgeditIPX Routing Protocol Configuration Elements IPX Routing Protocol Background Information SAPSpecial Considerations Remote LAN Interface Configuring IPX Static Routes Using Cfgedit IPX Static RoutesIPX Static Routes Configuration Elements IPX Static Routes Background InformationIPX Netware Static Services Configuring IPX Netware Static Services Using CfgeditIPX Netware Static Services Configuration Elements IPX Spoofing IPX Netware Static Services Background InformationConfiguring IPX Spoofing Using Cfgedit IPX Spoofing Configuration Elements IPX Spoofing Background InformationWatchdog Protocol Configuring IPX Type 20 Packet Handling Using Cfgedit IPX Type 20 Packet HandlingConfiguring IPX Isolated Mode Using Cfgedit IPX Isolated ModeIPX Type 20 Packet Handling Configuration Elements IPX Isolated Mode Configuration ElementsIPX Isolated Mode Background Information Displaying WAN Peer ListConfiguring Triggered RIP/SAP Global Timers Using Cfgedit Triggered RIP/SAP Background Information Configuring IPX DevicesIPX-SPECIFIC Information for Devices IPX-Specific Information for Devices SPX Watchdog Spoofing Menu Enable Bridging and disable Make calls for bridge data IPX Configuration Elements for Devices IPX Background Information for Devices Configuring Snmp Configuring SnmpConfiguring Snmp Snmp Configuration Elements Snmp Background Information WAN Workgroup Remote Access Switch USER’S Guide Appletalk Routing Option Configuring Appletalk RoutingEnabling Appletalk Routing Using Cfgedit Appletalk Ports Appletalk Routing Option Configuration ElementConfiguring Appletalk Ports Using Cfgedit Appletalk Routing Background InformationAppletalk Ports Configuration Elements Appletalk Ports Background Information Overview Appletalk Static Routes ConfigurationConfiguring Appletalk Static Routes Using Cfgedit ConsiderationsAppletalk Capacities Configuration Elements Appletalk Routing Static Routes Configuration ElementsConfiguring Appletalk Capacities Using Cfgedit Appletalk CapacitiesAppletalk Isolated Mode Configuration Elements Appletalk Isolated ModeConfiguring the Appletalk Isolated Mode Using Cfgedit Appletalk Capacities Background InformationThroughput Monitor Configuring Call ControlConfiguring the Throughput Monitor Using Cfgedit Throughput Monitor Configuration Elements 90% Throughput Monitor Background InformationCondition Trigger Number Window Size Utilization Overload Condition Monitoring Idle Condition Monitoring Call Interval Parameters Configuring the Call Interval Parameters Using CfgeditCall Interval Configuration Elements Call Interval Background InformationMonthly Call Charge Configuring Monthly Call Charge Using CfgeditMonthly Call Charge Configuration Elements Monthly Call Charge Background InformationCall Restrictions Configuring Call Restrictions Using CfgeditCall Restriction Configuration Elements Call Restrictions Call Restrictions Background Information Configuring Bandwidth Reservation Bandwidth Reservation= CentralSite Bandwidth Reservation Configuration Elements Select Bandwidth ReservationBandwidth Reservation Background Information Configuring Semipermanent Connections Using CfgeditSemipermanent Connections Semiperm Semipermanent Connections Background Information Semipermanent Connections Configuration ElementsCall Device Commands Call Restrictions Throughput MonitorConfiguring VRA Manager for Call Control Using Cfgedit VRA Manager AS a Call Control ManagerBackground Information LIMITATIONS/CONSIDERATIONS Configuring PPP Configuring Other Advanced OptionsPPP Configuration PPP Configuration Elements PPP Background Information PPP Reference Documents Default Line Protocol Configuration Elements Default Line ProtocolConfiguring Default Line Protocol Using Cfgedit Default Line Protocol Background InformationLOG Options Configuring LOG Options Using CfgeditLOG Options Configuration Elements UDP PortLOG Options Background Information CDR LOG Report Overview Call Detail Recording Events Event Report Contents Connect Event Report Contents System Up Event Report Contents Disconnect Event Report ContentsReject Event Report Contents Compression Options Configuration Elements Verify Event Report ContentsConfiguring Compression Options Using Cfgedit Compression OptionsCompression Options Background Information Compression and CCP Configuring Tftp TftpTftp Configuration Elements Tftp Background InformationFile Attributes Configuring File AttributesFile Attributes Configuration Elements File Attributes Background InformationRPRTLOG.1 Users Report Files StatFiles CfgFiles Other FilesFile category File types included in the category STATLOG.1Troubleshooting System VerificationSystem Verification Verifying Hardware Resources are OperationalVerifying WAN Lines are Available for USE Verifying LAN Connection is OperationalVerifying Bridge is Initialized Verifying IP Router is InitializedVerifying a Dedicated Connection Verifying a Frame Relay ConnectionVerifying MULTI-LEVEL Security Verifying AN X.25 ConnectionVerifying Remote Device Connectivity Ping 100.0.0.2 return Verifying IP Host is Initialized Verifying IP Host Mode is OperationalVerifying IP Host Mode is Operational Verifying IP Routing Over Interfaces Verifying IP Routing Over a LAN InterfaceVerifying IP Routing Over a WAN Interface 100.0.0.1 100.0.0.0 Host B 192.100.1.3 Host a 100.0.0.2 Verifying IP Routing Over a WAN Direct Host Interface Verifying IP Routing Over a WAN Remote LAN Interface Verifying IP Routing Over a WAN Unnumbered Interface Ip filter trace discard return Verifying IP FiltersVerifying IP RIP Verifying IP RIP is InitializedVerifying IP RIP Output Processing on a LAN Interface Verifying IP RIP Input Processing on a LAN Interface Verifying IP RIP Output Processing on a WAN InterfaceCSX1200 Router Dedicated Connection 100.1.1.1 192.1.1.1 Verifying IPX Router is Initialized Verifying IPX Routing is OperationalXxxx Verifying IPX Routing Over a LAN ConnectionVerifying AN IPX Remote LAN Connection Verifying Triggered RIP/SAP Verifying the Appletalk Routing FeatureVerifying IPX Routing Over a WAN Connection Verifying Appletalk Routing is InitializedVerifying Appletalk Routing is Operational Verifying Appletalk Routing Operation Over a WAN Connection Verifying Snmp is Operational Verifying the Dial OUT Feature Verifying Call Detail RecordingVerifying PPP Link Failure Detection is Operational Verifying Compression is OperationalVerifying Reserved Bandwidth is Operational Verifying Dhcp Relay Agent Verifying Dhcp Relay Agent InitializationVerifying the Relay Agent is Enabled Verifying the Relay Agent is OperationalVerifying Dhcp Proxy Client Verifying Dhcp Proxy Client InitializationUDP Ports Verifying the Proxy Client is EnabledVerifying the Proxy Client is Operational Verifying a Semipermanent Connection Verifying Proxy ARP is OperationalVerifying Proxy ARP is Operational Problem Problem DiagnosisGeneral Procedures LAN AdapterWAN Line Availability Bridge InitializationIP Routing Initialization Out Svc 1 slot #, port # Dedicated Connections Frame Relay ConnectionsConnections Remote Device Connectivity Set-upLAN Attachment DisabledMULTI-LEVEL Security IP Host Initialization IP Host ModeIP Host Mode Operation Over the LAN Connection IP Routing Over the LAN Interface Connection IP Host Mode Operation Over the WAN ConnectionIP Routing Over Interface Connections IP Routing Over a WAN Interface Connection IP Routing Over a WAN Direct Host Interface Connection IP Routing Over a WAN Rlan Interface Connection IP Routing Over a WAN Unnumbered Interface Connection If you are still experiencing problems IP RIP InitializationIP RIP Output Processing on a LAN Interface IP RIP Input Processing on a LAN InterfaceIP RIP Output Processing on a WAN Interface IP RIP Input Processing on a WAN InterfaceIPX Routing Over the LAN Connection IPX RoutingIPX Routing Initialization IPX Routing Over the Remote LAN Connection IPX Routing Over the WAN Connection IPX Routing and Service Tables Triggered RIP/SAP Operation Appletalk RoutingTriggered RIP/SAP Start UP Appletalk Routing Initialization Appletalk Routing Operational Over the LAN ConnectionUSER’S Guide Appletalk Routing Operational Over the WAN Connection Snmp CyberSWITCH does not generate Snmp Trap PDUs Set Up Dial OUTCall Detail Recording Peer Protocol-Rejects CCP CompressionSuccessful Negotiation Enabling the Relay Agent CyberSWITCH does not have Compression EnabledRelay Agent Initialization Relay Agent Operation Proxy Client InitializationEnabling the Proxy Client Proxy Client OperationProxy ARP Operation Proxy ARP Operation LED Indicators Local Area Network LED IndicatorsPRI LED Indicators Lanview Leds CSX1200-E11-MOD Receive LEDs OFFService Indicator Service Indicator Remains LITService Indicator Blinks OUT SVC LAN Xmit ErrorAlarm Leds PRI only Alarm LEDs PRI Only System Messages Informational MessagesNormal Operation Messages Boot MessagesInitialization Messages Status MessagesSpanning Tree Messages Error MessagesSystem Message Summary Call has exceeded the configured maximum duration Port LAN Adapter, operating in remote mode onlyPort LAN Adapter, operating in local and remote mode Adapter #’x’ failed to respond from bootstrapAuth ACE Could not create service file Attempting to load FileName for UpgradeAttempt to initialize unconfigured DM card in slot slot # Auth ACE Could not write service fileAuth ACE Login rejected user user name Auth ACE Encryption configured for DES not supportedAuth ACE Error receiving server log message acknowledgment Auth ACE Node verification received Client initializedAuth Radius IP Resolve rejected IP Address IP address Auth Radius Login rejected device device nameAuth Radius IP Host rejected IP Host id IP host Id Auth Radius PAP rejected device device nameAuth Warning code 0004 No authentication node available Auth Tacacs Login rejected user user nameAuth Warning code 0001 Timeout Auth Warning code 0007 Authentication mode mismatchBootstrap came alive on WAN card in slot slot # Booting System SoftwareBootstrap came alive on DM card in slot slot # Bad auth result in smgrauthaanotify for device device nameCalculating CRC’s Call Restrictions have been disabled by user commandCall Restrictions have been enabled by user command Calling Line ID Failure, Duplicate ID calling line IdCall Restrictions will allow calls to be made this hour Call Restriction statistics reset for new dayCall Restriction statistics reset for new month Call Restrictions will allow calls to be madeWorkgroup Remote Access Switch CCP Internal Decompression Failure Cause cause code received for Dlci dlci indexCause Code Event CCP Option Negotiation Failure, Non-Convergence detectedChap Authentication Failure remote device not responding Channel in use in HostcallrequestCurrent monthly charges reset for new month Configured adapter # ’x’ type does not existCouldn’t find speech service slot #, port # CNTR-TMRTimed out waiting for TMR number interruptDHCP-P Failed to open UDP port for first Dhcp client Dedicated connection down slot #, port #DHCP-P Failed to close UDP port x, erc = y DHCP-P Failed to open UDP port x, erc = yDHCP-R Relay Agent disabled DHCP-P Proxy Client disabledDHCP-P Proxy Client enabled DHCP-P Proxy Client initialization failedDHCP-R UDP port 67 closed DHCP-R Relay Agent enabledDHCP-R Relay Agent initialization failed DHCP-R UDP port 67 openedDM card in slot slot # will not come out of reset DM card in slot slot # signals it is operationalDM card type configured in slot slot # does not exist DM upgrade started. Board=board #, Modem=modem #Edrv transmit error error code DM upgrade success. Board=board #, Modem=modem #Downloading Bootstrap to DM card in slot slot # DSL test failed to establish Layer 1, port=port #Error downloading operational software to adapter ’x’ Error closing file ’s’Error downloading bootstrap program to adapter #’x’ Error during channel initialization Access access indexError opening file \system\ethernt2.bin Error mapping WAN adapter #’x’ into Host memory mapError parsing old WAN Direct Host interface bad format Error programming adapter #’x’ hardwareError sending message to Call Control Error reading sdconf.rec fileError requesting slot activation Facility not subscribed Slot=slot # Port=port #Failure during Static RAM test on adapter # ’x’ Failed to obtain Terminal info in smgrprocterminalauthsessFailure during read of file ’s’ Failure to allocate enough memory for Xilinx load fileUSER’S Guide Frietf detected PPP protocol from NAME, shutting down PVC File Access ErrFormatting Flash Memory Frame Relay event queue fullFrUtl No registered device for Dlci dlci index Installing File Set into Flash MemoryInterrupt fault on WAN Adapter in Slot slot # Initial TDM Clock Master slot#, line#IP Error from ESP datagram discarded Invalid Cllm received on Access access indexInvalid Password password given IP x.x.x.x not added to the pool Unknown error yIpap ResMem returned invalid device maximum value IP Default Route not added, invalid next hop IP address #IP Invalid configuration for Network Interface dd IP Cannot get system memory forIP IP router is initialized successfully IP Invalid Peer IP Address IP address, WAN IP Stream ClosedIP IP host is initialized successfully IP Network initialized successfully on ddd.ddd.ddd.dddIpcp Remote device does not negotiate IP address Ipcp IP Address Pool Out of IP addressesIpcp Option Negotiation Failure, Non-Convergence detected IP Host Call Dropped XID was not received from remoteIP RIP Buffers allocated IP Host Security Rejection Invalid Security ID Id stringIP RIP All network interfaces used IP RIP Initialization failed, unable to allocate buffersIPX Invalid Ipxwc passed IP RIP Unable to open RIP/UDP portIP RIP Unable to register WAN Connection notification IPX Network initialized successfully onIpxwan IPX Internal Network Number must be configured IPX SAP Space available in service tableIPX SAP Unable to add service, service table full IPX RIP Shutdown completeLAN Adapter Fatal Error Reported LAN Adapter Command TimeoutLAN Adapter configuration conflict LAN Adapter HW upgrade may be requiredLAN Adapter System resource error LAN Adapter ResetLAN Adapter Response Timeout LAN Init ErrorLMI alarm reset Access access index LAN Xmit ErrorLMI alarm on Access access index LAN Port port # detected shorted LAN mediaManual intervention required please replace LAN card Manage Mode updates have been successfully committedMemory Access Timeout Manual restart initiated on DM board in slot slot #Modem revision on modem modem # of slot slot # failed Mismatch of configured and installed DM card in slot slot #Modem modem # of DM card in slot slot # is unusable Negotiation Failure with Semipermanent deviceNo Active Calls Active Sites Network sent Cause Spid not supported slot #, port #Network sent Status with state = 0, tear down call No Active List entry available in INMOffnode server lookup of Dial Out User failed Out of LAN Adapter transmit command descriptorsNot enough memory for Security module Outgoing calls barred Slot=slot # Port=port #PAP Invalid password for name given by remote device Auto For over 5 minutes Report problem to Phone companyPAP Identification timeout on remote device Out Svc # slot # , port #Post number, Hdlc #number External Loopback Test Failed PAP Remote device rejected System Information error messagePAP Unknown name name given by remote device Post number, Hdlc #number Internal Loopback Test FailedPVC for Dlci dlci index not Active RBS LIFAddTimer failureRBSoutSMchannel # Timeout waiting for Wink PVC not allocated for dlci indexReplace Lithium Battery Contact your Representative Reattempting to Install File Set into Flash MemoryRebooting Reserved signalRx Channel Inactivity Detected Security Rejection Invalid Password password givenRetrying download of DM card in slot slot# in x seconds Security Rejection Caller did not negotiate securitySemipermanent. Device x disconnected by admin Security Rejection No Password given by callerSecurity Rejection Timeout on Startup Complete Security Rejection No Protocol List suppliedSlot #, port # Cfg Error Semipermanent. Device x reconnected by adminSignal for unknown CallCmd task task Id Snmp Authentication failure, unknown community nameSSB Couldn’t read RTC during i960 POSTs SSB Post 27 i960timer82c54FAILURESSB Can’t read RTC prior to i960 POSTs SSB i960 Post number not equal to i386’sSSB Post 30 i960permodmem1 Failure SSB Post 28 i960lan82596sx FailureSSB Post 29 i960lan82503 Failure SSB Post 31 i960permodmem2 FailureSystem Clock Fault on Wan Adapter in Slot slot # Successfully Loaded Release X.Y Issue ZSwitch could not recognize phone number nnnnnnn STP a Blan Topology Change has been detectedTftp Local error #4 UDP rejected packet filename Tftp Local error #2 Feature not initializedTftp Local error #3 Server not initialized Tftp Local error #5 UDP open failedTftp Local error #15 Bad mode string Tftp Local error #13 Received unexpected opcode filenameTftp Local error #14 Bad file name Tftp Local error #18 Unable to open file filenameTftp Remote error # 2 Text from Remote Host Tftp Remote error # 0 Text from Remote HostTftp Remote error # 1 Text from Remote Host Tftp Remote error # 3 Text from Remote HostTimeout detected on receiving caller’s number Compression subsystem is not enabledTimeout detected on connection establishment Timeout on Startup CompleteUnable to get Digital Modem resource to place call Type mismatch of configured & installed adapter # ’x’Unable to Decrypt Datagram Unable to restore original ISRs for Interrupt interrupt # Unable to open \config\devdb.nei fileUnable to open Modem Upgrade file Unable to Identify a remote deviceUpdating CyberSWITCH from FileName Unexpected error during transmission of LMI frameUnmatched Login Task WAN card in slot slot # signals it is operationalX25 facilities error, facilities not allowed in PVC Watchdog timeout detected on DM board in slot slot #Watchdog timeout detected on WAN board ’x’ X25 facilities error, bad facility lengthX25 facilities error, fast select not accepted X25 facilities error, reverse charging not acceptedX25 facilities error, fast select not available X25 facilities error, throughput negotiation not allowedZone allocation failed, increase zone table capacity Zone allocation failed, maximum capacity already configuredX25 facilities warning, NUI not available Trace Messages Call Trace Messages Location CausesCall Trace Message Summary -BRD CFG ACK Slot=slot # Configure ack slot #Inband treatment has been applied Init data link slot #, port #, ces Off-hook warning tone on Out configure port #Interworking unspecified cause Origination call address is non-ISDNRecall dial tone on Received unknown signal valueOut init data link slot #, port # , ces Received unknown progress valueIP Filters Trace Messages PPP Packet Trace Messages Configure NAK Configure RequestConfigure ACK Configure RejectDiscard Request Trace MessagesEcho Reply Trace Message SummaryX25 Data LCN logical channel number, number of bytes bytes X25 DCE RR LCN logical channel number, number of bytes bytesSystem is sending a call request to the network Lapb Trace Messages Lapb Trace Message SummaryOut Lapb Disc Lapb SabmeLapb UA Out Lapb DMSystem Maintenance Remote ManagementRemote Management Installation and Configuration SITE.2Usage Instructions Telnet Earlier Releases Usage Instructions Tftp Client PC Users Report Files Statistics Files Config files Other Files Remote Installation with USER2 USER’S Guide System Commands Accessing Administration ServicesSetting the IP Address Boot Device CommandsAccessing Dynamic Management Viewing Operational InformationList relnote.txt Viewing Operational Information Status Second column is the potential number of connections Viewing Throughput Information 100Throughput Monitor Contents Saving Operational InformationCONFIGURATION-RELATED Commands Clearing Operational InformationFile Utility Commands Restarting the CyberswitchSetting the Date and Time Terminating Administration Sessions Login-IdAppletalk Routing Commands Type StateFlags Default zoneNetwork range LAN portDistance Zones validZone Bridge Commands Call Control Commands Device name must be re-entered Calling phone number at data rate, device PPP Call Detail Recording Commands Call Restriction CommandsFrame Relay Commands Compression Information CommandsDhcp Commands Clears all statistics associated with the fr stat command IP Routing Commands Disables the trace Valid Icmp Echo Reply was received from host ddd.ddd.ddd.ddd Mask used for the destination Age of the route in seconds IPX Routing Commands Ipx ping host ipx address Isdn Usage Commands Isdn usagePacket Capture Commands LAN CommandsLOG Commands All packets will be captured Following is an example pkt display screen Banyan Vines Packet Detail Screen Bridged Packet Radius Commands Radius ipres Telnet Commands Snmp CommandsTCP Commands Used to close the current Telnet connection to a target host Possible send parameters are defined as follows Terminal Commands Tftp Commands Tftp GETTrace Commands Tftp SessionUDP Commands User Level Security CommandsWAN Commands CommandsClears the statistics for the default VC Call Restriction Statistics System StatisticsConnectivity Statistics Call Statistics Throughput Monitoring StatisticsAppletalk Statistics Appletalk Protocol StatisticsNumber of AppleTalk Echo requests received Count of AppleTalk Echo replies received Number of NBP LookUp Requests received Appletalk Port Statistics Bridge Statistics Call Detail Recording StatisticsDecompression Related Statistics Compression StatisticsCompression Related Statistics Common Dhcp Statistics Dhcp StatisticsDhcp Relay Agent statistics and Dhcp Proxy Agent statistics Dhcp Relay Agent Statistics Dhcp Proxy Client Statistics Access Related Statistics Frame Relay StatisticsNot currently supported PVC Related Statistics LAN Statistics IP Statistics IP Group StatisticsIcmp Group Statistics Number of Icmp Destination Unreachable messages received IPX Statistics IPX General StatisticsNumber of IPX packets received with incorrect checksums IPX RIP Statistics IPX Triggered RIP Statistics IPX Route StatisticsIPX Service Statistics IPX Triggered SAP StatisticsRIP Interface Statistics RIP StatisticsRIP Global Statistics Snmp Statistics SnmpInReadOnlys TCP Statistics Tftp Statistics Statistics for Server or Remote Initiated Tftp ActivityStatistics for Local or Client Initiated Tftp Activity Statistics for ALL Tftp ActivityUDP Statistics WAN Frietf Statistics Layer 1 PRI Error Statistics Layer 1 General StatisticsWAN Statistics Statistics Virtual Circuit VC Related Statistics Local DTE X.121 address Executing Configuration Changes Routine MaintenanceINSTALLING/UPGRADING System Software Making Changes Using CfgeditObtaining System Custom Information Configuration Backup and RestoreMaking Changes Using Manage Mode Appendices System WorksheetsSystem Worksheets Network Topology Lines System DetailsResources Accesses Authentication Information Frame Relay Information Device InformationBridging and Routing Information IP RoutingIPX Routing Appletalk Routing AppleTalk Routing/Port InformationSnmp PPP Main MenuIPX FR DBUHdlc PPP FR DBU Physical Resources MenuDES, Feal BPSDhcp Options MenuWAN Rlan Snmp FR DBU Isdn Security MenuRadius Tacacs ACE SVC, PVCPPP STAC-L25 VRA Manager TCP port Contacting Cabletron Systems Reporting ProblemsGetting Assistance Number of Pages Including this To Customer Service FromPhone FAX Cabletron Systems System Problem Report Displays help screen Administrative Console Commands TableCommand Use Displays or clears current AppleTalk port statisticsClears administration screen Command Use Cdr stats clearVerifies call detail recording servers are configured Clears current call detail recording statisticsDlci Log cdr erase Generates a triggered RIP/SAP update request toLocal log file only displays the call detail recording log Local log file only erases the call detail recording logChanges password for current access level Displays system errors and system messagesRevision information Displays the current Tftp statisticsDisplays current software version and hardware resource Access or the specified access Specified X.25 accessManage Mode Commands Table Address pool Ipxspoof Allows you to configure system level spoofing dataAdds/changes/deletes an IPX address from the IPX Manage Mode Commands Table USER’S Guide Cause Codes Table USER’S Guide Cause Codes Table USER’S Guide Workgroup Remote Access Switch USER’S Guide Dec Value Hex Value Cause UnknownCDR IndexBr stat Cdr 534 cfgDel 524 destfilt Cmp 535 commandsDate Device 162 Device addIp addrpool 535, 537 IP filters 241 IpcpLan test 355 Lanview LEDs 420 Lapb IsdnLan 545 LAN adapter Led status 518 lineNTT INS STAC-LZSSpid Restart 523 restoreSentry SrcfiltTerm 554 term set 357 terminal mode UdpWr 52, 521 ws 52 X25