Cabletron Systems CSX1200, CSX1000 manual VRA Manager Authentication Server

CONFIGURING OFF-NODE SERVER INFORMATION

VRA Manager Authentication Server

VRA MANAGER AUTHENTICATION SERVER

CONFIGURING VRA MANAGER AUTHENTICATION SERVER

Notes: In order for the CyberSWITCH to reference VRA Manager for device authentication, the following configuration steps must first be completed:

•IP Routing must be enabled. If you try to enable the VRA Manager before IP routing has been enabled, an error message will be displayed.

•The appropriate LAN network interface(s) must be configured to represent the local IP network.

•The appropriate WAN network information must be configured for each type of remote device configured that will connect to the system.

If you have configured Call Restrictions, you have configured system wide Call Restrictions. System wide Call Restrictions will override Call Restrictions configured on the VRA Manager on a per device basis.

USING CFGEDIT

1.Select Security from the main menu.

2.Select option (5), Off-node Server Information from the Security Menu. The following screen is displayed:

Off-node Server Information Menu:

1)VRA Manager

2)RADIUS

3)TACACS

4)ACE

Select function from above or <RET> for previous menu: 1

3.Select VRA Manager Authentication Server from the Off-node Server Information Menu. The following screen is displayed:

VRA Manager Menu:

TCP Port Number is 2000

VRA Manager Server Options:

1)VRA Manager TCP Port

Select function from above or <RET> for previous menu: 1

4.Enter the TCP port number used by the VRA Manager.

USING MANAGE MODE COMMANDS

vra

Displays the current VRA Manager configuration data.

vra change

Allows you to change the VRA Manager TCP port number.

Workgroup Remote Access Switch 179