Cisco Systems A9014CFD manual Enter the physical Layer 2 interface or port channel ID, 12-11

Chapter 12 Configuring Resilient Ethernet Protocol

Configuring Resilient Ethernet Protocol (REP)

DETAILED STEPS

	Command	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	interface interface-id	Specifies the interface, and enters interface configuration mode.
		• Enter the physical Layer 2 interface or port channel ID. The
	Example:	port-channel range is 1 to 8.
	Router(config)# interface
	gigabitethernet0/1
	Router(config)# interface port-channel 1
Step 4
	service instance <instance-id>	Configures ethernet virtual circuit for the administrative VLAN.
	ethernet encap dot1q <admin-vlan>
	rewrite ingress tag pop 1 symmetric
	bridge-domain <bd-id>
	Example:
	Router(config-if)# service instance 1
	ethernet encap dot1q 1
	rewrite ingress tag pop 1 symmetric
	bridge-domain 1

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		12-11