Cisco Systems A9014CFD manual Cfm mep domain domain-name mpid identifier, 10-8

Chapter 10 Configuring Ethernet OAM

10.exit

11.interface interface-id

12.service instance number ethernet name

13.cfm mep domain domain-name mpid identifier

14.end

15.show ethernet cfm maintenance-points {local remote}

16.show ethernet cfm errors [configuration]

17.copy running-config startup-config

DETAILED STEPS

		Command		Purpose
Step 1
		configure terminal		Enter global configuration mode. Enter your password if
				prompted.
Step 2
		ethernet cfm global		Globally enable Ethernet CFM on the router.
		Example:
		Router(config)# ethernet cfm global
Step 3
		ethernet cfm domain domain-namelevel level-id		Define a CFM domain, set the domain level, and enter
				ethernet-CFM configuration mode for the domain. The
		Example:		maintenance level number range is 0 to 7.
		Router(config)# ethernet cfm domain MD6 level 6
Step 4
		service {ma-name ma-number vpn-id vpn} {vlan		Define a customer service maintenance association (MA)
		vlan-id[direction down] port}		name or number or VPN ID to be associated with the
				domain, a VLAN ID or port MEP, and enter
		Example:		ethernet-cfm-service configuration mode.
					• ma-name—a string of no more than 100 characters that
		Router(config-ecfm)# service MA6 evc evc30 vlan
	30					identifies the MAID.
					• ma-number—a value from 0 to 65535.
					• vpn-idvpn—enter a VPN ID as the ma-name.
					• vlan vlan-id—VLAN range is from 1 to 4094. You
						cannot use the same VLAN ID for more than one
						domain at the same level.
					• (Optional) direction down—specify the service
						direction as down.
				Note Two MAs can be configured such that MA2
							connected with different BD will act as a proxy
							(alias) for MA1 only for the MEPs which have the
							service direction as Up.
					• port—Configure port MEP, a down MEP that is
						untagged and not associated with a VLAN.
			Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
10-8							OL-23826-09