Cisco Systems A9014CFD manual Removing the 1588BC License, Router# license clear 1588BC

Chapter 2 Licensing

Port or Interface Behavior

Installing licenses from "flash:CAT1632U029_20121005013805577.lic"

Installing…Feature:1588BC…Successful:Supported

1/1 licenses were successfully installed 0/1 licenses were existing licenses

0/1 licenses were failed to install

Following is a sample output from the show license command:

Note When the 1588BC license is installed and PTP boundary clock is not configured, the license state is displayed as Active, Not in Use. When the 1588BC license is installed and PTP boundary clock is configured, the license state is displayed as Active, In Use.

Router#	show license
Index 1	Feature: AdvancedMetroIPAccess
Index 2	Feature: IPBase
Index 3	Feature: Gige4portflexi
Index 4	Feature: 10gigUpgrade
Index 5	Feature: 1588BC
	Period left: Life time
	License Type: Permanent
	License State: Active, In Use
	License Count: Non-Counted
	License Priority: Medium

Removing the 1588BC License

If PTP boundary clock is configured, then the following error message appears when removing the 1588BC license:

Router# license clear 1588BC

Feature: 1588BC

License Type: Permanent

License State: Active, In Use

License Addition: Exclusive

License Count: Non-Counted

Comment:

Store Index: 2

Store Name: Primary License Storage

Are you sure you want to clear? (yes/[no]): yes

Handling Event, Unknown event type: 3

% Error: Could not delete in-use license

Complete the following steps to remove the 1588BC license.

Step 1 Use the no ptp clock command to remove the PTP boundary clock configuration.

Router(config-ptp-clk)#no ptp clock boundary domain 0

Step 2 Use the license clear command to remove the 1588BC license.

Router# license clear 1588BC

Feature: 1588BC

License Type: Permanent

License State: Active, Not in Use

License Addition: Exclusive

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
2-10	OL-23826-09