Cisco Systems A9014CFD manual 12-23

Chapter 12 Configuring Resilient Ethernet Protocol

Configuring Resilient Ethernet Protocol (REP)

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	show interface [interface-id]rep [detail]	(Optional) Displays the REP configuration and status for
		a specified interface.
	Example:	• Enter the physical Layer 2 interface or port channel
	Router# show interface gigabitethernet0/1 rep	(logical interface) and the optional detail keyword,
	detail	if desired.
Step 3
	show rep topology [segment segment-id] [archive]	(Optional) Displays REP topology information for a
	[detail]	segment or for all segments, including the primary and
		secondary edge ports in the segment.
	Example:	• Enter the optional keywords and arguments, as
	Router# show rep topology	desired.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		12-23