Cisco Systems A9014CFD manual Verification Examples for Remote LFA-FRR, 39-27

Chapter 39 Remote Loop-Free Alternate - Fast Reroute

How to Configure Remote Loop-Free Alternate - Fast Reroute

	Command	Purpose
Step 9	interface CEM slot/port	Defines a CEM channel.
	Example:
	Router(config)# interface CEM 0/0
Step 10	no ip address	Removes an IP address or disables IP processing.
	Example:
	Router(config-if)# no ip address
Step 11	cem group-number	Defines a CEM channel.
	Example:
	Router(config-if)# cem 0
Step 12	xconnect ip-addressencapsulation mpls	Binds an attachment circuit to a pseudowire, to configure an Any
		Transport over MPLS (AToM) static pseudowire.
	Example:	• ip-address—IP address of the remote provider edge (PE) peer.
	Router(config-if-cem)# xconnect	The remote router ID can be any IP address, as long as it is
	2.2.2.2 111 encapsulation mpls	reachable.
		• encapsulation—Specifies the tunneling method to encapsulate
		the data in the pseudowire.
		• mpls—Specifies Multiprotocol Label Switching (MPLS) as the
		tunneling method.
Step 13	backup peer peer-ip-address	Specifies a redundant peer for a pseudowire VC.
		• peer-ip-address—IP address of the remote peer.
	Example:
	Router(config-if-cem-xconn)# backup
	peer 2.2.2.3 111

Verification Examples for Remote LFA-FRR

•Verifying Remote LFA-FRR Configuration, page 39-28

•Verifying Remote LFA-FRR Configuration for EoMPLS on a GigabitEthernet Interface, page 39-30

•Verifying Remote LFA-FRR Configuration for EoMPLS on an EVC Interface, page 39-32

•Verifying Remote LFA-FRR Configuration on IS-IS, page 39-33

•Verifying Remote LFA-FRR Configuration on ATM/IMA, page 39-33

•Verifying Remote LFA-FRR Configuration on CESoPSN, page 39-34

•Verifying Remote LFA-FRR Configuration on SAToP, page 39-35

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		39-27