Cisco Systems A9014CFD Re-marking Mpls EXP Values of CPU Generated Traffic, Generated traffic

Chapter 24 Configuring QoS

Extending QoS for MLPPP

	Command	Purpose
Step 3
	cpu traffic ppp set ip dscp cs5	Re-marks the IP DSCP value to give the desired QoS treatment to CPU
		generated traffic.
	Example:
	Router(config)# cpu traffic ppp set
	ip dscp cs5
Step 4
	exit	Exits configuration mode.
	Example:
	Router(config)# exit

Re-marking MPLS EXP Values of CPU Generated Traffic

Complete the following steps to re-mark the MPLS EXP values of the CPU generated traffic.

SUMMARY STEPS

1.enable

2.configure terminal

3.cpu traffic ppp set mpls experimental topmost number

4.exit

DETAILED STEPS

	Command	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	cpu traffic ppp set mpls	Re-marks Multiprotocol Label Switching (MPLS) experimental (EXP)
	experimental topmost number	topmost value to give the desired QoS treatment to CPU generated traffic.
	Example:	• number—MPLS EXP field in the topmost label header. Valid values
		are 0 to 7.
	Router(config)# cpu traffic ppp set
	mpls experimental topmost 4
Step 4
	exit	Exits configuration mode.
	Example:
	Router(config)# exit

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		24-73