Cisco Systems A9014CFD manual 10-43

Chapter 10 Configuring Ethernet OAM

	Command	Purpose
Step 3
	ethernet oam link-monitor receive-crc {threshold	(Optional) Configure thresholds for monitoring ingress
	{high {high-frames none} low {low-frames}}	frames received with cyclic redundancy code (CRC) errors
	window milliseconds}	for a period of time.
		• Enter the threshold high high-framescommand to set
		a high threshold for the number of frames received
		with CRC errors. The range is 1 to 65535 frames.
		• Enter the threshold high none command to disable the
		high threshold.
		• Enter the threshold low low-framescommand to set a
		low threshold in number of frames. The range is 0 to
		65535. The default is 1.
		• Enter the window milliseconds command to set the a
		window and period of time during which frames with
		CRC errors are counted. The range is 10 to 1800 and
		represents the number of milliseconds in multiples of
		100. The default is 100.
Step 4
	ethernet oam link-monitor symbol-period	(Optional) Configure high and low thresholds for an
	{threshold {high {high symbols none} low	error-symbol period that triggers an error-symbol period
	{low-symbols}} window symbols}	link event.
		• Enter the threshold high high-symbolscommand to
		set a high threshold in number of symbols. The range
		is 1 to 65535.
		• Enter the threshold high none command to disable the
		high threshold.
		• Enter the threshold low low-symbolscommand to set
		a low threshold in number of symbols. The range is 0
		to 65535. It must be lower than the high threshold.
		• Enter the window symbols command to set the window
		size (in number of symbols) of the polling period. The
		range is 1 to 65535 symbols.
Step 5
	ethernet oam link-monitor frame {threshold {high	(Optional) Configure high and low thresholds for error
	{high-frames none} low {low-frames}} window	frames that trigger an error-frame link event.
	milliseconds}	• Enter the threshold high high-framescommand to set
		a high threshold in number of frames. The range is 1 to
		65535. You must enter a high threshold.
		• Enter the threshold high none command to disable the
		high threshold.
		• Enter the threshold low low-framescommand to set a
		low threshold in number of frames. The range is 0 to
		65535. The default is 1.
		• Enter the window milliseconds command to set the a
		window and period of time during which error frames
		are counted. The range is 10 to 600 and represents the
		number of milliseconds in a multiple of 100. The
		default is 100.
	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09			10-43