Cisco Systems A9014CFD Individual IP SLAs operation, Specifies an IP SLAs operation group number

Chapter 11 ITU-T Y.1731 Performance Monitoring

Verifying the Frame Delay and Synthetic Loss Measurement Configurations

DETAILED STEPS

	Command or Action	Purpose
Step 1	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	Do one of the following:	Configures the scheduling parameters for an
	• ip sla schedule operation-number[life {forever	individual IP SLAs operation.
	seconds}] [start-time{hh : mm[: ss] [month day	Specifies an IP SLAs operation group number and the
	day month] pending now after hh : mm :	range of operation numbers to be scheduled for a
	ss}] [ageout seconds] [recurring]
		multi-operation scheduler.

•ip sla group schedule group-operation-number operation-id-numbers schedule-periodschedule-period-range [ageout seconds] [frequency group-operation-frequency] [life{forever seconds}] [start-time{hh:mm[:ss] [month day day month] pending now after hh:mm:ss}]

	Example:
	Router(config)# ip sla schedule 10 start-time now
	life forever
	Example:
	Router(config)# ip sla group schedule 1 3,4,6-9
Step 4
	exit	Exits global configuration mode and enters privileged
		EXEC mode.
	Example:
	Router(config)# exit

Verifying the Frame Delay and Synthetic Loss Measurement Configurations

•Example: Verifying Sender MEP for a Two-Way Delay Measurement Operation, page 11-16

•Example: Verifying Receiver MEP for a Two-Way Delay Measurement Operation, page 11-16

•Example: Verifying Sender MEP for a Synthetic Loss Measurement Operation, page 11-17

•Example: Verifying Ethernet CFM Performance Monitoring, page 11-17

•Example: Verifying History for IP SLAs Operations, page 11-18

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		11-15