Cisco Systems A9014CFD manual Following example, 42-19

Chapter 42 IPv6 Multicast

Configuring IPv6 Multicast

	To display the MRIB table, use the show command described in the following example. All entries are
	created by various clients of MRIB, such as, MLD, PIM and MFIB. The flags on each entry or interface,
	serve as communication mechanism between various clients of MRIB.
	Router# show ipv6 mrib route FF0E::E0:1:1:1
	IP Multicast Routing Information Base
	Entry flags: L - Domain-Local Source, E - External Source to the Domain,
	C - Directly-Connected Check, S - Signal, IA - Inherit Accept, D - Drop
	Interface flags: F - Forward, A - Accept, IC - Internal Copy,
	NS - Negate Signal, DP - Don't Preserve, SP - Signal Present,
	II - Internal Interest, ID - Internal Disinterest, LI - Local
	Interest,
	LD - Local Disinterest
	(*,FF0E::E0:1:1:1) RPF nbr: 51::1:1:2 Flags: C
	FastEthernet4/10 Flags: F NS LI
	Tunnel1 Flags: A NS
	(47::1:1:3,FF0E::E0:1:1:1) RPF nbr: 47::1:1:3 Flags:
	Vlan47 Flags: A
	Tunnel0 Flags: F NS
	FastEthernet4/10 Flags: F NS
	To display the count of the number of routes in the Multicast RIB, use the show command described in
	the following example.
	Router# show ipv6 mrib route summary
	MRIB Route-DB Summary
	No. of (*,G) routes = 53
	No. of (S,G) routes = 1
	No. of Route x Interfaces (RxI) = 24
	To display information about the various MRIB clients, use the show command described in the
	following example.
	Router# show ipv6 mrib client
	IP MRIB client-connections
	igmp:110 (connection id 0)
	pim:162 (connection id 1)
	mfib ipv6:3 (connection id 2)
	To display information about the IPv6 Multicast Forwarding Information Base, in terms of forwarding
	entries and interfaces, use the show command described in the following example.
	Router# show ipv6 mfib FF0E::E0:1:1:1
	IP Multicast Forwarding Information Base
	Entry Flags: C - Directly Connected, S - Signal, IA - Inherit A flag,
	AR - Activity Required, D - Drop
	Forwarding Counts: Pkt Count/Pkts per second/Avg Pkt Size/Kbits per second
	Other counts: Total/RPF failed/Other drops
	Interface Flags: A - Accept, F - Forward, NS - Negate Signalling
	IC - Internal Copy, NP - Not platform switched
	SP - Signal Present
	Interface Counts: FS Pkt Count/PS Pkt Count
	(*,FF0E::E0:1:1:1) Flags: C
	Forwarding: 0/0/0/0, Other: 0/0/0
	Tunnel1 Flags: A NS
	FastEthernet4/10 Flags: F NS
	Pkts: 0/0
	(47::1:1:3,FF0E::E0:1:1:1) Flags:
	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
OL-23826-09		42-19