Cisco Systems A9014CFD manual 39-26

Chapter 39 Remote Loop-Free Alternate - Fast Reroute

How to Configure Remote Loop-Free Alternate - Fast Reroute

10.no ip address

11.cem group-number

12.xconnect ip-addressencapsulation mpls

13.backup peer peer-ip-address

DETAILED STEPS

	Command		Purpose
Step 1	enable		Enables privileged EXEC mode.
			• Enter your password if prompted.
	Example:
	Router> enable
Step 2	configure terminal		Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3	controller {t1 e1} slot/port		Selects a T1 or E1 controller and enters controller configuration
			mode.
	Example:
	Router(config)# controller e1 0/0
Step 4	framing unframed		Specifies the framing format of a circuit emulation (CEM) T1 or E1
			port.
	Example:
	Router(config-controller)# framing
	unframed
Step 5	clock source internal		Sets clocking for individual T1 or E1 links.
	Example:
	Router(config-controller)# clock
	source internal
Step 6	cem-group group-numberunframed		Assigns channels on the T1 or E1 circuit to the CEM channel.
			• group-number—Channel number to be used for this group of
	Example:		time slots.
	Router(config-controller)# cem-group 0		• unframed—Specifies that a single CEM channel is being
	unframed
			created including all time slots and the framing structure of the
			line.
Step 7	description descriptive-name		Specifies a descriptive name for the controller
	Example:
	Router(config-controller)# description
	E1 SAToP example
Step 8	exit		Exits controller configuration mode.
	Example:
	Router(config-controller)# exit
		Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
39-26			OL-23826-09