Cisco Systems A9014CFD manual How to Enable Transceiver Monitoring, 40-2, Transceiver type all

Chapter 40 Digital Optical Monitoring

How to Enable Transceiver Monitoring

The command line output for the real-time parameters is shown using the show interfaces transceiver command. To enable threshold notification in the transceiver via SNMP, use the

snmp-server enable traps transceiver command. You can use the show controllers gig 0/x command to check whether SFP’s are DOM capable. This command displays the SFP details.

How to Enable Transceiver Monitoring

Complete the following steps to enable transceiver monitoring:

Restrictions

•You need the transceiver module compatibility information for configuring transceiver monitoring. The compatibility matrix that lists the support for DOM in the Cisco transceiver modules is available at the following URL:

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/ OL_8031.html

•In case of combo ports with SFP and RJ45 provision, when SFP is inserted in slot or port and media type is not configured to SFP, DOM is functional if global transceiver monitoring is enabled.

SUMMARY STEPS

1.enable

2.configure terminal

3.transceiver type all

4.monitoring

5.monitoring interval seconds

DETAILED STEPS

	Command	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	configure terminal	Enters global configuration mode.
	Example:
	Router# configure terminal
Step 3
	transceiver type all	Enters transceiver type configuration mode.
	Example:
	Router(config)# transceiver type all

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
40-2	OL-23826-09