Cisco Systems A9014CFD manual Ethernet oam link-monitor frame-period, 10-40

Chapter 10 Configuring Ethernet OAM

	Command	Purpose
Step 7
	ethernet oam link-monitor frame-period	(Optional) Configure high and low thresholds for the
	{threshold {high {high-framesnone} low	error-frame period that triggers an error-frame-period link
	{low-frames}} window frames}	event.
	Note Repeat this step to configure both high and	• Enter threshold high high-framesto set a high
	low thresholds.	threshold in number of frames. The range is 1 to
		65535. The default is none.
		• Enter threshold high none to disable the high
		threshold if it was set. This is the default.
		• Enter threshold low low-framesto set a low threshold
		in number of frames. The range is 0 to 65535. The
		default is 1.
		• Enter window frames to set the a polling window size
		in number of frames. The range is 1 to 65535; each
		value is a multiple of 10000 frames. The default is
		1000.
Step 8
	ethernet oam link-monitor frame-seconds	(Optional) Configure high and low thresholds for the
	{threshold {high {high-framesnone} low	frame-seconds error that triggers an error-frame-seconds
	{low-frames}} window milliseconds}	link event.
	Note Repeat this step to configure both high and	• Enter threshold high high-framesto set a high error
	low thresholds.	frame-seconds threshold in number of seconds. The
		range is 1 to 900. The default is none.
		• Enter threshold high none to disable the high
		threshold if it was set. This is the default.
		• Enter threshold low low-framesto set a low threshold
		in number of frames. The range is 1 to 900. The default
		is 1.
		• Enter window frames to set the a polling window size
		in number of milliseconds. The range is 100 to 9000;
		each value is a multiple of 100 milliseconds. The
		default is 1000.

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
10-40	OL-23826-09