Cisco Systems A9014CFD manual Monitoring EVC, Command Description

Chapter 8 Configuring Ethernet Virtual Connections

Monitoring EVC

Monitoring EVC

Note Statistics are not available in the service instance command. To look at flow statistics, you need to configure a class default policy on the service instance.

Table 8-2	Supported show Commands
Command		Description
show ethernet service evc [id evc-id		Displays information about all EVCs, or a specific EVC when you enter an EVC
interface interface-id] [detail]		ID, or all EVCs on an interface when you enter an interface ID. The detail
		option provides additional information about the EVC.
show ethernet service instance [id		Displays information about one or more service instance (EFPs). If you specify
instance-id interface interface-id		an EFP ID and interface, only data pertaining to that particular EFP is displayed.
interface interface-id] {[detail] [stats]}		If you specify only an interface ID, data is displayed for all EFPs on the
		interface.
show bridge-domain [n]		Displays all the members of the specified bridge-domain, if a bridge-domain
		with the specified number exists.
		If you do not enter n, the command displays all the members of all
		bridge-domains in the system.
show bridge-domain n split-horizon		Displays all the members of bridge-domain n that belong to split horizon group
[group {group_id all}]		0, when you do not specify a group group_id with this command.
		If you specify a numerical group_id, this command displays all the members of
		the specified group id.
		When you enter group all, the command displays all members of any split
		horizon group.
show ethernet service instance detail		This command displays detailed service instance information, including Layer
		2 protocol information. This is an example of the output:
		Router# show ethernet service instance detail
		Service Instance ID: 1
		Associated Interface: Ethernet0/0
		Associated EVC:
		L2protocol tunnel lacp
		CE-Vlans:
		State: Up
		EFP Statistics:
		Pkts In	Bytes In	Pkts Out	Bytes Out
		0	0	0	0
show mac address-table		This command displays dynamically learned or statically configured MAC
		security addresses.
show mac address-table bridge-domain		This command displays MAC address table information for the specified bridge
bridge-domain id		domain.
show mac address-table count		This command displays the number of addresses present for the specified bridge
bridge-domainbridge-domain id		domain.
show mac address-table learning		This command displays the learning status for the specified bridge domain.
bridge-domainbridge-domain id

	Cisco ASR 901 Series Aggregation Services Router Software Configuration Guide
8-28	OL-23826-09